Loading ...
Loading ...
Loading ...
Open the trunk.
Remove the holding clips from the
lining by using a flat-tipped
screwdriver.
Remove the socket by turning it
one-quarter turn counterclockwise,
and pull the bulb straight out of its
socket.
Push a new bulb straight into the
socket until it bottoms, and
reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Testthenewbulbtomakesureit
works.
Set the lining back.
2.
1.
4.
3.
5.
6.
Replacing Rear Turn Signal Light
Bulbs
Lights
210
HOLDING CLIPS
BULB
SOCKET
０５／０９／０２ １２：０１：２３ ３１ＳＤＲ６１０ ０２１３
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...