Loading ...
Loading ...
Loading ...
Turn the ignition switch to the
START (III) position. If the
headlights do not dim, check the
condition of the fuses. If the fuses
areOK,thereisprobably
something wrong with the
electrical circuit for the ignition
switch or starter motor. You will
need a qualified technician to
determine the problem (see
on page ).
In this case, the starter motor’s
speed sounds normal, or even faster
than normal, when you turn the
ignition switch to the START (III)
position, but the engine does not run.
Are you using the proper starting
procedure? Refer to
on page .
Are you using a properly coded
key? An improperly coded key will
cause the immobilizer system
indicator in the instrument panel
to blink rapidly (see page ).
Do you have fuel? Check the fuel
gauge; the low fuel indicator may
not be working.
There may be an electrical
problem, such as no power to the
fuel pump. Check all the fuses
(see page ).
If the headlights dim noticeably or
go out when you try to start the
engine, either the battery is dis-
charged or the connections are
corroded. Check the condition of
the battery connections (see page
). You can then try jump
starting the vehicle from a booster
battery (see page ).
Ifyoufindnothingwrong,youwill
need a qualified mechanic to find the
problem. See
on page .
241
232
221
165
77
243
241
Emergency Towing
The Starter Operates Normally
Starting the
Engine
Emergency Towing
IftheEngineWon’tStart
Taking Care of the Unexpected
231
０５／０９／０２ １２：０３：５２ ３１ＳＤＲ６１０ ０２３４
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...