Loading ...
Loading ...
Loading ...
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
57
3. Press the key to enter the menu.
4. Enter on the numeric keypad to get to frequency offset.
5. Press key to select.
6. Use the and keys and the numerical keypad to enter the specified frequency
offset. See the section called “26 OFFSET - Frequency shift amount” for details.
7. Press to confirm and save.
8. Enter on the numeric keypad to get to offset direction.
9. Use the and keys to select + (positive) or - (negative) offset.
10. Press to confirm and save.
11. Optional:
a. Save to memory, see the section called “Manual programming” for details.
b. Set up CTCSS; see the section called “CTCSS” for details.
12. Press to exit the menu.
If everything went well, you should be able to make a test call through the repeater. If you're
experiencing problems making a connection to the repeater, check your settings and/or go
through the procedure again.
Certain Amateur Radio repeaters (especially in Europe) use a 1750Hz tone burst to open up the
repeater. To see how this is done with the BaoFeng BF-F8HP, see the section called “1750Hz
Tone-burst”.
Loading ...
Loading ...
Loading ...