Loading ...
Loading ...
Loading ...
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
35
Channel Mode (MR) is selected. Only when VFO mode is selected, can the detected
tone/code be saved to menu 11/10.
CTCSS tone and DCS code scanning mode can be accessed with or without a signal being
present. The scanning process itself only occurs while a signal is being received.
Not all repeaters requiring a CTCSS tone or DCS code for access will transmit one back. In
that case, the transmitter of a station that can access the repeater would need to be
scanned. In other words: this would be done by listening to stations on the repeater's
input frequency.
Scanning for CTCSS Tone
1. Press the key to enter the menu.
2. Enter on your numeric keypad to come to Menu 11: R-CTCS
3. Press the key to select. Insure you have a tone activated (and it is not off)
4. Press the to begin CTCSS scanning
A flashing "CT" will be in the left status display to indicate the radio is in CTCSS scanning mode.
In this mode, whenever the radio is receiving an RF signal on the selected MR channel or VFO
frequency, the lower display will cycle through the CTCSS tones as they are being tested. Once
the frequency of the received CTCSS tone is determined, the "CT" indicator will stop flashing.
Loading ...
Loading ...
Loading ...