Loading ...
Loading ...
Loading ...
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
7
Belt clip
At the back of the radio there are two parallel screws mounted above the
battery, remove these and thread them through the holes on the belt
clip as you screw them back into the radio body.
Do not use any form of glue to fix the screws on the battery clip.
The solvents in the glue may cause damage to the battery
casing.
Battery
Before attaching or removing the battery make sure your radio is turned
off by turning the power/volume knob all the way counter-clockwise.
Installation
Make sure the battery is aligned in parallel with the radio body with the
lower edge of the battery about 1-2cm below the edge of the radio.
Once aligned with the guide-rails, slide the battery upward until you hear
a click as the battery locks in place.
Loading ...
Loading ...
Loading ...