Loading ...
Loading ...
Loading ...
207
Practical information
Connect one end of the green or black
cable to the negative terminal (-) of the
slave battery
B
.
Connect the other end of the green or black
cable to the negative terminal (-) of the flat
battery
A
.
Start the slave vehicle.
Operate the starter of the broken down
vehicle and let the engine run.
Wait until the engine returns to idle and
disconnect the cables.
Charging the battery using
a battery charger
Batteries contain harmful substances
such as sulphuric acid and lead. They
must be disposed of in accordance
with regulations and must not, in any
circumstances, be discarded with
household waste.
Take used remote control batteries and
vehicle batteries to a special collection
point.
Disconnect the battery from the vehicle.
Follow the instructions for use provided by
the manufacturer of the charger.
Reconnect starting with the negative
terminal (-).
Check that the terminals and connectors
are clean. If they are covered with sulphate
(whitish or greenish deposit), remove them
and clean them.
The Stop & Start battery does not have
to be disconnected for charging.
It is advisable to disconnect the battery
if the vehicle is to be left unused for
more than one month.
Loading ...
Loading ...
Loading ...