Loading ...
Loading ...
Loading ...
Battery. See Changing the 12V Battery (page 325).C.
Engine oil filler cap. See Engine Oil Check (page 317).D.
Engine oil dipstick. See Engine Oil Dipstick (page 317).E.
Brake fluid reservoir. See Brake Fluid Check (page 324).F.
Air filter. See Changing the Engine Air Filter (page 333).G.
Engine coolant reservoir. See Engine Coolant Check (page 319).H.
ENGINE OIL DIPSTICK
E146429
MINA
MAXB
ENGINE OIL CHECK
To check the engine oil level consistently
and accurately, do the following:
1. Make sure the parking brake is on. Make
sure the transmission is in park (P) or
neutral (N).
2. Run the engine until it reaches normal
operating temperature.
3. Make sure that your vehicle is on level
ground.
4. Switch the engine off and wait 15
minutes for the oil to drain into the oil
pan. Checking the engine oil level too
soon after you switch the engine off
may result in an inaccurate reading.
5. Open the hood. See Opening and
Closing the Hood (page 315).
6. Remove the dipstick and wipe it with
a clean, lint-free cloth. See Under
Hood Overview (page 316).
7. Replace the dipstick and remove it
again to check the oil level. See
Engine Oil Dipstick (page 317).
8. Make sure that the oil level is between
the maximum and minimum marks. If
the oil level is at the minimum mark,
add oil immediately. See Capacities
and Specifications (page 374).
9. If the oil level is correct, replace the
dipstick and make sure it is fully seated.
Note: Do not remove the dipstick when the
engine is running.
Note: If the oil level is between the
maximum and minimum marks, the oil level
is acceptable. Do not add oil.
Note: The oil consumption of new engines
reaches its normal level after approximately
3,000 mi (5,000 km).
Adding Engine Oil
WARNING
Do not remove the filler cap when
the engine is running.
317
Expedition (TB8) Canada/United States of America, enUSA, Edition date: 201707, First Printing
Maintenance
Loading ...
Loading ...
Loading ...