Loading ...
Loading ...
Loading ...
Time GapDistance GapGraphicsSensitivitySpeed
>0.9sec>82 ft (25 m)GreyNormal
62 mph
(100 km/h)
between
0.6sec and
0.9sec
56–82 ft
(17–25 m)
YellowNormal
62 mph
(100 km/h)
<0.6sec<56 ft (17 m)RedNormal
62 mph
(100 km/h)
Adjusting the Pre-Collision Assist
Settings
You can adjust the Alert and Distance Alert
sensitivity to one of three possible settings
by using the information display control.
See General Information (page 109).
You can switch the Distance Indication and
Alert function off using the information
display controls. See General
Information (page 109).
If required, you can switch active braking
off using the information display controls.
See General Information (page 109).
If required, you can turn the entire
Pre-Collision Assist feature off using the
information display controls. See General
Information (page 109).
Note: We recommended that you turn the
system off if you install a snow plow or
similar object in such a way that it may
block the radar sensor. Your vehicle
remembers the selected setting across key
cycles.
Blocked Sensors
E257553
If a message regarding a blocked sensor
or camera appears in the information
display, the radar signals or camera images
are obstructed. The radar sensor is behind
a fascia cover near the driver side of the
lower grille. With an obstructed radar, the
Pre-Collision Assist system does not
function and cannot detect a vehicle
ahead. With the front camera obstructed,
249
Expedition (TB8) Canada/United States of America, enUSA, Edition date: 201707, First Printing
Driving Aids
Loading ...
Loading ...
Loading ...