Loading ...
Loading ...
Loading ...
entry keypad or an extra set of keys. If
your vehicle has intelligent access,
press the engine START/STOP button
once without pressing the brake pedal.
You do not need to leave your keys in
the vehicle. You can lock and unlock
your vehicle as you normally do.
9. Release the brake pedal.
WARNINGS
Do not disconnect the battery during
recreational towing. It prevents the
transfer case from shifting properly
and may cause the vehicle to roll, even if
the transmission is in park (P).
Shifting the transfer case to its
neutral position for recreational
towing may cause the vehicle to roll,
even if the transmission is in park (P). It
may injure the driver and others. Make sure
you press the foot brake and the vehicle is
in a secure, safe position when you shift to
neutral (N).
Note: Failing to put the transfer case in its
neutral position may damage vehicle
components.
Note: You can check four-wheel-down
towing status at any time by opening the
driver door or turning the ignition to the
accessory or on position and verifying the
message displays in the cluster.
Exiting Four-wheel-down Towing
To exit four-wheel-down towing and return
the transfer case to its 2H position:
1. With your vehicle still properly secured
to the tow vehicle, start the engine.
2. After starting your vehicle, turn the
engine off, but leave the key in the on
position.
Note: If your vehicle is equipped with
intelligent access, you can keep the vehicle
on while turning the engine off by pressing
the START/STOP button two times
without pressing the brake pedal.
3. Press and hold the brake pedal.
4. Shift the transmission out of neutral
(N) and into park (P).
5. Release the brake pedal.
Note: If completed successfully, the
instrument cluster displays 4X2, and
Neutral Tow Disabled.
Note: If the indicator light and message do
not display, you must perform the procedure
again from the beginning.
Note: You may hear an audible noise as the
transfer case shifts out of its neutral
position. This is normal.
Note: If Shift Delayed Pull Forward
displays in the instrument cluster, transfer
case gear tooth blockage is present. See the
instructions after this section.
6. Apply the parking brake, then
disconnect the vehicle from the tow
vehicle.
7. Release the parking brake, start the
engine, and shift the transmission to
drive (D) to make sure the transfer
case is out neutral (N).
8. If the transfer case does not
successfully shift out of neutral (N),
set the parking brake until you can have
your vehicle serviced.
Resolving the Shift Delayed Pull
Forward Message
If the instrument cluster displays Shift
Delayed Pull Forward, perform the
following:
1. Press and hold the brake pedal.
2. Put the transmission into neutral (N),
then start the engine.
285
Expedition (TB8) Canada/United States of America, enUSA, Edition date: 201707, First Printing
Towing
Loading ...
Loading ...
Loading ...