Loading ...
Loading ...
Loading ...
2. Push the knob for the main oven and turn it
counterclockwise to to ignite the main oven
burner.
• Push the knob for the top oven and turn it
counterclockwise to to ignite the top
oven burner.
3. Keep the knob pushed for equal or less than
15 seconds to let the thermocouple warm up. If
not, the gas flow is interrupted.
4. After ignition release the knob, close the oven
door and turn the knob to set the necessary
heat setting.
WARNING! Do not push the knob for
more than 15 seconds. If the oven
burner does not light after 15
seconds, release the knob, turn it back
to off position and try to light the oven
burner again after minimum 1 minute.
CAUTION! In the absence of
electricity you can ignite the oven
burner without an electrical device. In
this case open the oven door, put the
flame near the hole in the bottom of
the oven cavity, turn the knob to the
spark position and push it down. Keep
the knob for the oven functions
pushed for equal or less than 15
seconds to let the thermocouple warm
up.
If the oven burner accidentally goes
out, turn the knob for the oven
functions to the off position and try to
light the burner again after minimum 1
minute.
Check if the burner holes are not
blocked.
TURNING OFF THE OVEN BURNERS
To put out the flame, turn the knob to the off
position.
USING THE GRILL
1. Turn the knob for the oven functions clockwise
to
2. Adjust the deep pan runner position to fit in
different portions of food.
Refer to Grilling in "Hints and Tips" chapter.
COOLING FAN
When the oven operates, the cooling fan turns on
automatically to keep the surfaces of the oven cool.
If you turn off the oven, the cooling fan can
continues to operate until the oven cools down.
If there is a defect in the cooling fan,
contact the Authorised Service
Centre.
INSERTING THE OVEN ACCESSORIES
Deep pan:
Do not use the deep pan on the first shelf position
in the main oven.
Push the deep pan between the guide bars of the
shelf support.
Wire shelf and the deep pan together:
Push the deep pan between the guide bars of the
shelf support and the wire shelf on the guide bars
above.
• All accessories have small
indentations at the top of the right
and left side to increase safety. The
indentations are also anti-tip
devices.
• The high rim around the shelf is a
device which prevents cookware
from slipping.
11
Loading ...
Loading ...
Loading ...