Loading ...
Loading ...
Loading ...
22
TEMPERATURE CONTROL – DELUXE
DELUXE CONTROLLER FUNCTIONS
If one or more Deluxe controllers are installed, at least one must be on or the Bath Fill function activated for
the water heater to operate. If all Deluxe controllers and the Bath Fill function are off, the water heater will
only deliver cold water.
on / off (
X 10L
88
°C
) button – The on / off (
X 10L
88
°C
) button must be pressed once to turn on the Deluxe controller. A
Deluxe controller cannot be turned on if water is flowing from a hot tap.
To turn off a Deluxe controller, press the on / off (
X 10L
88
°C
) button once. A Deluxe controller
can be turned off whilst water is flowing.
on / off operating light – The on / off operating light on the on / off (
X 10L
88
°C
) button will glow when the Deluxe
controller is turned on.
The light will go out when the Deluxe controller is turned off.
PRIORITY light – The PRIORITY light will glow on a Deluxe controller when the controller has priority.
The Bathroom Deluxe controller(s), if they are turned on, have priority over the Kitchen
Deluxe controller.
PRIORITY means that particular Deluxe controller has control of the water heater
temperature setting. The water temperature setting can only be adjusted by a Deluxe
controller that has priority and is displaying the PRIORITY light.
operating light – The operating light will glow on all Deluxe controllers, whether they are on or off, when
hot water is flowing, regardless of which Deluxe controller has priority.
temperature display panel – The current temperature setting is displayed in °C on all Deluxe controllers
(whether hot water is flowing or not), when any Deluxe controller is on. If all Deluxe
controllers are off, the display remains blank.
up () button – The up () button increases the water temperature setting (refer to “Temperature
Adjustment – Deluxe Controllers” on page 27).
down () button – The down () button decreases the water temperature setting (refer to “Temperature
Adjustment – Deluxe Controllers” on page 27).
assistance call (
BATH (l)
°C
0
) button – Pressing this button sounds an alert message on all Deluxe controllers,
indicating that assistance is required in the room from which the assistance call (
BATH (l)
°C
0
)
button was activated.
speaker – The audio of the voice prompts and chimes is emitted from the speaker.
bath fill (
X 10L
88
°C
) button – The bath fill (
X 10L
88
°C
) button must be pressed once to turn on the Bath Fill function.
When the Bath Fill function is turned on, the last selected bath fill water volume in
litres will be displayed in the bath fill water volume display panel and the last selected
bath fill temperature in °C will be displayed in the temperature display panel.
The bath fill water volume and temperature can be adjusted by using the BATH FILL
VOLUME and BATH FILL TEMPERATURE buttons located behind the hinged panel
on the lower half of the Deluxe controller (refer to “Bath-Fill Function” on page 32).
To turn off the Bath Fill function, press the bath fill (
X 10L
88
°C
) button.
bath fill operating light – The bath fill operating light on the bath fill (
X 10L
88
°C
) button will glow when the
bath fill (
X 10L
88
°C
) button is pressed and the Bath Fill function is turned on.
The light will flash when the Bath Fill function is complete but before the Bath Fill
function has been turned off.
The light will go out when the bath fill (
X 10L
88
°C
) button is pressed and the Bath Fill
function is turned off.
Loading ...
Loading ...
Loading ...