Loading ...
Loading ...
Loading ...
240 If and when
Side turn signal bulbs
Fig. 163 Side turn sig-
nals
– Press the turn signal to the left or to the right to remove the
bulb.
– Remove the bulb holder from the turn signal.
– Remove the failed bulb and replace with a new bulb.
– Insert the bulb holder in the turn signal guide until it clicks into
place.
– First fit the turn signal in the opening in the chassis, fastening
the tabs
1
⇒ fig. 163, and then fit in the bulb as shown by the
arrow
2
⇒ fig. 163.
Number plate light
Fig. 164 Remove the
number plate light.
– Insert the flat part of a screwdriver into the special slot and re-
move the number plate light from its moulding.
– Remove the connector and extract the bulb. After changing the
bulb, fit the connector again.
– Place the light in its moulding, pressing the left side. Once it is
fitted into place, press the right side until you hear a click.
Loading ...
Loading ...
Loading ...