Loading ...
Loading ...
Loading ...
237If and when
– Remove the connector ⇒ fig. 156
2
from the bulb.
– Unclip the retainer spring ⇒ fig. 156
3
pressing inwards to the
right.
– Extract the bulb and fit the replacement so that the rim of the
attachment plate is on the reflector cut-out.
Side lights
Fig. 157 Side lights
– Raise the bonnet.
– Move the loop
1
⇒ fig. 155 in the direction of the arrow and
remove the cover.
– Remove the bulb holder
4
⇒ fig. 157 outwards.
– Replace the bulb by pulling it out and inserting the replace-
ment.
– Installation is done in the reverse order.
Turn signal bulb
Fig. 158 Single turn sig-
nal lamp
– Raise the bonnet.
– Rotate the bulb holder ⇒ fig. 158
A
to the left and pull.
– Remove the bulb by pressing on the bulb holder and rotating at
the same time to the left.
– Installation is done in the reverse order.
Safety First Operating Instructions Practical Tips Technical Specifications
Loading ...
Loading ...
Loading ...