Loading ...
Loading ...
Loading ...
234 If and when
– Remove connector ⇒ fig. 150
2
by pulling outward.
– Extract the bulb and fit the replacement so that it sits correctly
into the cut-out on the reflector.
– Installation is done in the reverse order.
Dipped beam and side lights
Fig. 151 Dipped beam
headlights
Fig. 152 Dipped beam
headlights
– Raise the bonnet.
– Move the loop ⇒ fig. 151
1
in the direction of the arrow and
remove the cover.
– Remove the connector ⇒ fig. 152
2
from the bulb.
– Unclip the retainer spring ⇒ fig. 152
3
pressing inwards to the
right.
– Extract the bulb and fit the replacement so that the rim of the
attachment plate is on the reflector cut-out.
Loading ...
Loading ...
Loading ...