Loading ...
Loading ...
Loading ...
223If and when
Wheel covers*
The wheel covers must be removed for access to the wheel
bolts
Fig. 141 Remove the
complete hub cap
Removing
– Remove the wheel cover using the wire hook ⇒ fig. 141.
– Hook this into one of the cut-outs of the wheel cover.
Fitting
– Fit the wheel cover onto the wheel rim by pressing it firmly. Put
pressure initially on the point of the cut-out for the valve. Next
fit the rest of the hubcap
Loosening the wheel bolts
The wheel bolts must be loosened before raising the vehicle.
Fig. 142 Changing the
wheel: loosen the wheel
bolts
Loosening
– Fit the box spanner as far as it will go over the wheel bolt.
– Grasp the box spanner by the end turn it about one full turn to
the left ⇒ fig. 142.
Tightening
– Fit the box spanner as far as it will go over the wheel bolt.
– Grasp the box spanner close to the end and turn the bolt to the
right until it is secured.
– An adapter is required to unscrew or tighten the anti-theft
wheel bolts.
Safety First Operating Instructions Practical Tips Technical Specifications
Loading ...
Loading ...
Loading ...