Loading ...
Loading ...
Loading ...
97
MAINTENANCE
Cleaning and Storage
Storage Tips
Inspect and Lubricate
Inspect all cables and lubricate all areas of the vehicle as
recommended in the Periodic Maintenance Chart beginning on page
57.
Fog the Engine
1. Treat the fuel system with POLARIS Carbon Clean or other
equivalent fuel treatment. Follow the instructions on the container.
Start the engine. Allow it to idle for several minutes so the Carbon
Clean reaches the injectors. Stop the engine.
2. Remove the spark plug and add 2-3 tablespoons of engine oil. To
access the plug hole, use a section of clear 1/4” hose and a small
plastic squeeze bottle filled with the pre-measured amount of oil.
3. Reinstall the spark plug. Torque to specification. See page 71.
4. Apply dielectric grease to the inside of the spark plug cap. Do not
reinstall the cap onto the plug at this step.
5. Turn the engine over several times. Oil will be forced in and
around the piston rings and ring lands, coating the cylinder with a
protective film of fresh oil.
6. If fuel system additive is not used, fuel tank, fuel lines, and
injectors should be completely drained of gasoline.
7. Reinstall the spark plug cap to the spark plug.
Loading ...
Loading ...
Loading ...