Loading ...
Loading ...
Loading ...
47
OPERATION
New Operator Driving Procedures
1. Read and understand this owner's manual and all warning and
instruction labels before operating this vehicle.
2. Watch the instructional video with the supervising adult.
3. Review the section of this owner’s manual about starting the
engine, stopping the engine, braking and parking (pages 45-46).
4. Perform the pre-ride inspection (page 43).
5. The driver must wear helmet, eye protection, gloves, long-sleeve
shirt, long pants, over-the-ankle boots and seat belt at all times.
6. Do not operate in this vehicle if the
clearance between the top of your
helmet and the overhead cab frame is
less than 2 inches (5 cm).
7. Select a level open area to practice
driving. Make sure you have adult
supervision and permission to drive in
this area.
8. Sit in the driver's seat and fasten the
seat belt.
9. Make sure all cab nets are properly secured.
10. Set the parking brake.
11. Place the transmission in neutral.
12. Start the engine.
Minimum
2 inches
(5 cm)
Loading ...
Loading ...
Loading ...