Loading ...
Loading ...
Loading ...
32
Models With Wire Racks
Assemble the wire racks to the oven walls using the 2 screws(fig.4.1-4.2)
Slide in ,on the guides, the shelf and the tray(fig.4.3-4.4).
To dismantle, operate in reverse order.
Top oven Bottom main oven
The shelf must be fitted so that the safety catch, which stops it sliding out,
faces the inside of the oven.
33
Fig.4.1
Fig.4.2
Fig.4.3
Fig.4.4
Door removal
In order to obtain easier access to the oven
chamber for cleaning , it is possible to
remove the door.
the door back on to the cooker, do the
protrusion of the hinge holder. After the
the safety catch is not set it may cause
damage to the hinge when closing the
To do this, tilt the safety catch part of the
hinge upwards. Close the door lightly, lift
and pull it out towards you. In order to fit
of the hinge is correctly placed on the
door is fitted to the oven, the safety catch
should be carefully lowered down again. If
door.
panel
is in the corner at the top of the door. Next
blocking mechanism and remove. After
and screw in the blocking mechanism.
Removal of the internal glass
Unscrew and unfasten the plastic latch that
cleaning, insert and block the glass panel,
reverse. When fitting, ensure that the notch
take out the glass from the second
Tilting the hinge safety catches
Door removal
Install door
Removal of the internal glass panel
Loading ...
Loading ...
Loading ...