Loading ...
Loading ...
Loading ...
either press the back arrow button on the touchscreen or
the Back button on the faceplate to return to the previous
menu or press the “X” button on the touchscreen to close
out of the settings screen. Pressing the Up or Down
Arrow buttons on the touchscreen on the right side of the
screen will allow you to toggle up or down through the
list of available settings.
NOTE: All settings should be changed with the ignition
in the “Run” position.
Display
After pressing the “Display” button on the touchscreen
the following settings will be available.
• Display Mode
When in this display you may select one of the auto display
settings. To change Mode status, select from “Day,” “Night”
or “Auto” until a check-mark appears next to the setting,
showing that setting has been selected.
NOTE: When Day or Night is selected for the Display
Mode, the usage of the Parade Mode feature will cause
the radio to activate the Display Brightness Day control
even though the headlights are on.
• Display Brightness With Headlights ON
When in this display, you may select the brightness with
the headlights on. Adjust the brightness with the “+” and
“–” setting buttons on the touchscreen or by selecting any
point on the scale between the “+” and “–” buttons on the
touchscreen.
NOTE: To make changes to the ⬙Display Brightness with
Headlights ON⬙ setting, the headlights must be on and
the interior dimmer switch must not be in the ⬙party⬙ or
⬙parade⬙ positions.
398 UNDERSTANDING YOUR INSTRUMENT PANEL
Loading ...
Loading ...
Loading ...