Loading ...
Loading ...
Loading ...
• Push the LOCK
button on the exterior Passive
Entry Door Handle with a valid Key Fob available
in the same exterior zone (refer to ⬙Keyless Enter-
N-Go — Passive Entry⬙ in ⬙Things To Know Before
Starting Your Vehicle⬙ for further information).
• Push the LOCK
button on the RKE Key Fob.
3. If any doors are open, close them.
The Vehicle Security Alarm will set when you use the
power door locks, or use the RKE Key Fob to lock the
doors. After all the doors are locked and closed, the
Vehicle Security Light, in the instrument panel cluster,
will flash rapidly for about 16 seconds to indicate that the
alarm is being set. After the alarm is set, the Vehicle
Security Light will flash at a slower rate to indicate that
the system is armed.
To Disarm The System
The Vehicle Security Alarm can be disarmed using any of
the following methods:
1. Push the UNLOCK
button on the RKE Key Fob.
2. Grasp the Passive Entry Unlock Door Handle with a
valid RKE Key Fob within 5 ft (1.5 m) of the passive
entry door handle (if equipped, refer to ⬙Keyless
Enter-N-Go — Passive Entry⬙ in ⬙Things To Know
Before Starting Your Vehicle⬙ for further information).
3. Cycle the ignition out of the OFF position.
• For vehicles equipped with Keyless Enter-N-Go —
Ignition, push the Keyless Ignition
button (re-
quires at least one valid RKE Key Fob in the
vehicle).
• For vehicles not equipped with Keyless Enter-N-Go,
insert a valid key into the ignition switch and turn
the key to the ON position.
2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23
Loading ...
Loading ...
Loading ...