Loading ...
2
Important information to know about disposal of
refrigerants:
Dispose of refrigerator in accordance with Federal and Local
regulations. Refrigerants must be evacuated by a licensed,
EPA certified refrigerant technician in accordance with
established procedures.
PROPER DISPOSAL OF YOUR OLD REFRIGERATOR
Suffocation Hazard
Remove doors from your old refrigerator.
Failure to do so can result in death or brain damage.
WARNING
IMPORTANT: Child entrapment and suffocation are not problems of
the past. Junked or abandoned refrigerators are still dangerous, even
if they will sit for “just a few days”. If you are getting rid of your old
refrigerator, please follow these instructions to help prevent accidents.
Before You Throw Away Your Old Refrigerator or Freezer:
J Take off the doors.
J Leave the shelves in place so that children may not easily climb
inside.
Using the Controls
The refrigerator and freezer controls are located on the
dispenser panel.
IMPORTANT: The display screen on the dispenser control panel
will turn off automatically and enter “sleep” mode when the control
buttons and dispenser lever have not been used for 2 minutes or
more. While in “sleep” mode, the first press of a control button will
only reactivate the display screen, without changing any settings.
J Touch any control button on the dispenser panel to activate the
display screen. The home screen will appear as shown.
Adjusting Controls
For your convenience, your refrigerator and freezer controls are
preset at the factory. When you first install your refrigerator, make
sure that both the refrigerator and freezer controls are still set to
the recommended “mid-setting”. This will be indicated with three
illuminated bars.
IMPORTANT:
J Wait 24 hours before you put food into the refrigerator. If you add
food before the refrigerator has cooled completely, your food may
spoil.
NOTE: Adjusting the set points to a colder than recommended setting
will not cool the compartments any faster.
J If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not blocked
before adjusting the controls.
J The preset settings should be correct for normal household
usage. The controls are set correctly when milk or juice is as cold
as you like and when ice cream is firm.
J Wait at least 24 hours between adjustments. Recheck the
temperatures before other adjustments are made.
When adjusting set points, use the following chart as a guide:
Condition: Adjustment:
REFRIGERATOR too cold REFRIGERATOR Setting one
setting lower
REFRIGERATOR too
warm
REFRIGERATOR Setting one
setting higher
FREEZER too cold FREEZER Setting one setting lower
FREEZER too warm/ too
little ice
FREEZER Setting one setting
higher
The set point range is “1 bar” (least cold) to “5 bars” (coldest).
Refrigerator Control:
J Press REFRIGERATOR TEMP to view the current set point for the
refrigerator.
J Press REFRIGERATOR TEMP again to adjust the set point. The
settings will increase by 1 bar with each press of the button,
returning to 1 bar after reaching 5.
After 2 minutes of inactivity, any changes will be saved and the
display will return to the home screen.
Freezer Control:
J Press FREEZER TEMP to view the current set point for the freezer.
2
IMPORTANT: Child entrapment and suffocation are not problems of the
past. Junked or abandoned refrigerators are still dangerous, even if
they will sit for “just a few days.” If you are getting rid of your old
refrigerator, please follow these instructions to help prevent accidents.
Before You Throw Away Your Old Refrigerator or Freezer:
Take off the doors.
Leave the shelves in place so that children may not easily climb
inside.
Using the Controls
The refrigerator and freezer controls are located on the dispenser
panel.
IMPORTANT: The display screen on the dispenser control panel will
turn off automatically and enter “sleep” mode when the control buttons
and dispenser lever have not been used for 2 minutes or more. While in
“sleep” mode, the first press of a control button will only reactivate the
display screen, without changing any settings.
Touch any control button on the dispenser panel to activate the
display screen. The home screen will appear as shown.
Adjusting the Controls
For your convenience, your refrigerator and freezer controls are preset
at the factory. When you first install your refrigerator, make sure that
both the refrigerator and freezer controls are still set to the recommended
“mid-setting.” This will be displayed in the sequence of bars with three
illuminated bars.
IMPORTANT:
Wait 24 hours before you put food into the refrigerator. If you add
food before the refrigerator has cooled completely, your food may
spoil.
NOTE: Adjusting the set points to a colder than recommended
setting will not cool the compartments any faster.
If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not blocked
before adjusting the controls.
The preset settings should be correct for normal household usage.
The controls are set correctly when milk or juice is as cold as you
like and when ice cream is firm.
Wait at least 24 hours between adjustments. Recheck the
temperatures before other adjustments are made.
When adjusting set points, use the following chart as a guide.
The set point range is “1 bar” (coldest) to “5 bars” (least cold).
Refrigerator Control:
Press REFRIGERATOR TEMP to view the current set point for the
refrigerator.
Important information to know about disposal of
refrigerants:
Dispose of refrigerator in accordance with Federal and Local
regulations. Refrigerants must be evacuated by a licensed,
EPA certified refrigerant technician in accordance with
established procedures.
OPERATING YOUR REFRIGERATOR
CONDITION: ADJUSTMENT:
REFRIGERATOR too cold REFRIGERATO R S etting
one setting higher
REFRIGERATOR too warm REFRIGERATO R S etting
one setting lower
FREEZER too cold FREEZER Setting
one setting higher
FREEZER too warm /
Too little ice
FREEZERSetting
one setting lower
Press REFRIGERATOR TEMP again to adjust the set point.
The setting will increase by one bar with each press of the button,
returning to one bar after reaching five. After 2 minutes of
inactivity, any changes will be saved and the display will return to
the home screen.
Freezer Control:
Press FREEZER TEMP to view the current set point for the freezer.
Loading ...
Loading ...
Loading ...