Loading ...
Loading ...
Loading ...
14
OVEN RACKS
Cleaning Method:
■ Steel-wool pad.
■ For racks that have discolored and are harder to slide, a light
coating of vegetable oil applied to the rack guides will help
them slide.
OVEN CAVITY AND OVEN DOOR INTERIOR
Do not use oven cleaners.
Food spills should be cleaned after the oven cools. At high
temperatures, foods react with porcelain and staining, etching,
pitting, or faint white spots can result.
Cleaning Method:
■ Self-Cleaning cycle:
See the “Self-Cleaning Cycle” section rst.
■ For optimal door cleaning results, wipe away any deposits with
a damp sponge before running cycle.
Oven Lights
The oven light(s) are standard 25-watt appliance bulbs.
Beforereplacing, make sure the oven is cool and the controls
areturned off.
To Replace:
1. Disconnect power.
2. Open oven door.
3. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
4. Turn bulb counterclockwise to remove from socket.
5. Replace bulb, and then bulb cover, by turning clockwise.
6. Reconnect power.
TROUBLESHOOTING
First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid
aservicecall,refer to the warranty page in this manual or visit producthelp.whirlpool.com. InCanada, visit http://www.whirlpool.ca.
Contact us by mail with any questions or concerns at the address below:
In the U.S.A.:
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
In Canada:
Whirlpool Brand Home Appliances
Customer eXperience Centre
200 - 6750 Century Ave.
Mississauga, Ontario L5N 0B7
Please include a daytime phone number in your correspondence.
Problem Possible Causes and/or Solutions
Nothing will operate Household fuse is blown, or a circuit breaker is tripped: Replace the fuse or reset the circuit breaker.
Ifthe problem continues, call an electrician.
Oven will not operate Control Lock is on: “Control Lock” will display on the screen. Scroll up to unlock.
Sabbath Mode is set: See the “Sabbath Mode” section.
On double oven models, one oven is self-cleaning: When one oven is self-cleaning, the other
ovencannot be set or turned on.
Oven temperature
toohighor too low
Oven temperature needs adjustment: See the “Temperature Calibration” section.
Display shows
messages
Power failure: On some models, reset the clock if needed. See “Preferences” in the “Tools” section.
Error code (display shows letter followed by number): Press the oven Cancel keypad to clear the
display. If it reapears, call for service. See the “Warranty” section for contact information.
Demo Mode (product is in Demo Mode): See “To Exit Demo Mode” in the “Tools” section.
Clean cycle did not
workonall spills
Several cooking cycles between Clean cycles or spills on oven walls and doors: Run additional
Cleancycles. The affresh
®
Kitchen and Appliance Cleaner can be used for stubborn soils. See the
“Accessories” and “Self-Cleaning Cycle” sections for more information.
Warm air coming
fromovenvent
Warm air coming from the oven vent is normal. During a self-clean cycle, the air stream is increased.
The cooling fan may operate both during an oven’s cycle and after the cycle has ended, causing warm
airto exit from the oven vent.
Convection fan runs
duringBake function
It is normal for the convection fan and element to operate during Bake mode to enhance performance
andheat distribution.
Long preheat times Not all cycles require preheating. See cycle instructions for preheat recommendations. Most cycles
preheatto 350°F (177°C) in 12 to 17 minutes. Higher temperatures will take more time. Removing
unusedoven racks prior to preheating can help reduce preheat time.
Loading ...
Loading ...
Loading ...