Loading ...
Loading ...
Loading ...
For reasons of safety, the system can only be
switched on once. The system will be available
again as soon as the drive-ready state is acti‐
vated and deactivated again.
Observe the information about the intended use
of the vehicle, refer to page 10.
Setting the departure time
Via iDrive
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Preconditioning/ventilation"
5. Select the desired departure time.
6. Set the departure time.
7. Select day of the week, if needed.
Via BMW display key
1.
Switch on the display of the BMW display
key.
2. "Precondit. setting"
3. Tap on the symbol.
4. Select the desired departure time.
5. Set the departure time.
6. Select day of the week, if needed.
7. "OK"
Activating the departure time
Functional requirement
If a requested departure time is to influence the
switching on of the system, the respective de‐
parture time must be activated first.
Via iDrive
1.
"CAR"
2. "Settings"
3. "Climate control"
4. "Preconditioning/ventilation"
5. Activate the desired departure time.
, The symbol on the automatic climate
control signals an activated departure time
Via BMW display key
1. Switch on the display of the BMW display
key.
2. "Precondit. setting"
3. Tap on the symbol.
4. Activating the desired departure time:
Tap on the symbol.
The symbol on the automatic climate
control signals an activated departure time.
Display in the instrument cluster
Symbol Description
The engine runs for the purpose
of operating the stationary cli‐
mate control. The vehicle is not
ready to drive.
Seite 274
CONTROLS
Climate control
274
Online Edition for Part no. 01402628420 - VI/19
Loading ...
Loading ...
Loading ...