Loading ...
Loading ...
Loading ...
The vehicle maneuvers automatically until the
vehicle reaches a position in which the driver can
drive out of the parking space without further
steering movements.
Functional requirement
▷ The vehicle was parked manually and objects
in front of and behind the car are detected.
The distance to a detected curb is at least
6 inches/15 cm.
▷ The vehicle was parked using the parking as‐
sistant and an object is detected in front of
the vehicle.
▷ The parking space is at least 2.6 ft/0.8 m lon‐
ger than your vehicle.
Driving out of parking spaces
1.
Switch on drive-ready state.
2. Steptronic transmission:
Press the park assistance button or shift into
reverse gear when the vehicle is stationary to
switch on the parking assistant.
3. Tilt the controller to the right and activate the
parking assistant on the Control Display:
"Autom. Parking"
4. On the Control Display, confirm the required
direction for driving out of the parking space if
necessary.
5. Steptronic transmission:
The system takes control of the maneuver. A
message will be displayed at the end of the
maneuver.
6. Make sure that the traffic situation permits
driving out of the parking space and drive off
as usual.
The parking assistant is switched off auto‐
matically.
Back-up assistant
Concept
The system supports the driver when driving in
reverse, for instance when driving out of tight or
confusing parking or street situations.
The vehicle stores the driving movements of the
last route. This stored route can be driven back
with automated steering.
General information
The system takes control of the steering when
driving in reverse along the stored route.
The driver controls driving the vehicle via accel‐
erator pedal and brake.
Functional requirements
▷ Drive forward without interruption to store the
route.
▷ A maximum of 165 ft/50 m will be stored.
▷ To store the route, do not exceed a driving
speed of 22 mph/36 km/h.
▷ The return route must be at least
12 in./30 cm wider than your vehicle.
Driving back with automated
steering
1.
Press the park assistance button or shift into
reverse gear when the vehicle is stationary
and the drive-ready state is switched on.
2. Move the Controller to the right.
3. "Back-up Assistant"
The system takes over the steering.
4. Follow the instructions on the Control Display
where required.
5. Take your hands off the steering wheel and
carefully drive off with the accelerator pedal
and the brake.
When driving in reverse, pay attention to the
vehicle's surroundings, and if you suddenly
encounter an obstacle, stop immediately and
Seite 254
CONTROLS
Driver assistance systems
254
Online Edition for Part no. 01402628420 - VI/19
Loading ...
Loading ...
Loading ...