Loading ...
Loading ...
Loading ...
en Faults and what to do about them
38
Odours in the washing
machine.
Depending on the model, run the ¾ Drum Clean or i Cottons 90 °C pro-
gram without laundry.
Add washing powder or a detergent containing bleach.
Note: To prevent foaming, only use half the amount of detergent recommended
by the detergent manufacturer. Do not use detergents designed for wool or del-
icates.
Foam is leaking from the
detergent drawer. Foam
is visible in the drum
The Å symbol lights up in the display panel.
■ Have you used too much detergent? Use less detergent in the next wash
cycle.
■ Mix one tablespoon of fabric softener with 1/2 litre of water and pour it into
compartment II (not suitable for outdoor clothing, sportswear or items
stuffed with down).
Loud noises, vibrations
and machine "move-
ment" during the spin
cycle.
■ Is the appliance aligned? Align the appliance. ~ Page 14
■ Are the appliance's feet fixed? Secure the appliance's feet. ~ Page 14
■ Have the transport locks been removed? Remove the transport locks.
~ Page 11
The display panel/indica-
tor lights do not work
while the appliance is run-
ning.
■ Has there been a power failure?
■ Have the fuses blown? Reset/replace the fuses.
■ If the fault occurs repeatedly, call customer services.
■ End of program reached. Energy-saving mode is activated
There is detergent resi-
due on the laundry.
■ Some phosphate-free detergents contain water-insoluble residue.
■ Select the program ' Rinse or brush the laundry after washing.
If you cannot rectify a fault yourself (after switching the machine off and on again) or a repair is required:
■ Switch off the appliance and pull out the mains plug.
■ Turn off the tap and call customer services. ~ Page 39
Faults Cause/Remedy
Loading ...
Loading ...