Loading ...
Loading ...
Loading ...
Opemtiq
Your Air Conditioner
Controk(~~.ti.~~)
For Normal Cooling
1. Set Selector Switch at HIGH
COOL.
2. Set Thermostat Control at
desti
number
(usdy
the midpoint
is a good starting position). If room
temperature is not satisfactory after
a reasonable time, set the temperature
control at a higher number for a
cooler room or at a lower number
for a warmer room.
For
~imum
Cooling
1. Set Selector Switch at HIGH
COOL.
2. Set Thermostat
Con~l
at 10.
3. Set Ventilation Control at
CLOSE position.
4. Shift Fan Switch to
CONTINUOUS.
For Quieter Operation
1.
Set Selector Switch at LOW
COOL.
2. Set Thermostat Control at
desired number.
3. Set Ventilation Control at
CLOSE position.
4. Shift Fan Switch to desired
position—CONTINUOUS or
~CLE.
For Nighttime Operation
During the cooler evening hours,
it is recommended that you set the
Selector Switch at LOW COOL for
very quiet operation and the
Thermostat Control at mid-range
(5
or
6).
When the Thermostat Control is set
on 9 or 10 and the Fan is set on low
speed, moisture may freeze on the
coils and prevent the unit from
cooling. If this happens, set the
Fan at high speed and set the
Thermostat Control to a lower
number.
For Etireme
~mperatures
For greatest economy and best
performance, we suggest you
always set the Selector Switch at
HIGH COOL in extremely hot
weather.
For air circulation and
filtering without cooling
or heating
Set Selector Switch at HIGH FAN
or LOW FAN.
For Ventilation
Whether controls are set for
coohg,
heating or fan
ody
operation, setting
Ventilation Control at OPEN lets
room air be exhausted to the
outside. This is helpful in removing
stale air, smoke or odors from the
room, and permits outdoor air to
enter through normal openings in the
house. However, cooling
effmtiveness
is reduced when this control is set
at OPEN, so we suggest you don’t
keep it there long—especially in
hot, humid weather.
For Normal Heating
1. Set Selector Switch at HIGH
HEAT.
2. Set Thermostat Control at
desired number
(us~y
the midpoint
is a good starting position). If room
temperature is not satisfactory after
a-enable time, set the temperature
control at a lower number for a
warmer room or at a higher number
for a cooler room.
For
Mti
urn Heating
1. Set Selector Switch at HIGH
HEAT.
2. Set Thermostat Control at 1.
3. Set Ventilation Control at
CLOSE position.
4. Shift Fan Switch to
CONTINUOUS.
4
Loading ...
Loading ...
Loading ...