Loading ...
Loading ...
OPERATE ON VOLTAGE SPECIFIED ON CLIPPER:
Not all clippers have an adjustable blade. If you have a deluxe adjustable
clipper, the following instructions apply to your clipper. The adjustable clippers
have a blade that enables you to cut hair at various lengths.
To adjust: Move thumb blade
adjustment lever down for coarse (B)
cuttingandupfor�ne(A)cutting.
OPERATING THE CLIPPER:
1. Remove the blade guard from the
unit which is covering the teeth of
the blades.
2. Disperse a few drops of Oster
®
Premium lubricating Oil across
the blades. Wipe off excess with
a clean, dry cloth.
3. Clean clippings from the blades using the cleaning brush or an old
toothbrush. Wipe the housing with a clean, dry cloth.
4. Before replacing the blade guard for storage, spread one or two drops of
Oster
®
Premium lubricating Oil, over the blades to prevent rusting.
BLADE SHARPENING:
Oster
®
cutting blades are of individual hollow-ground design, hardened to
extendcuttinglife.Aswithanycuttinginstrument,thecuttingedgeswill
become dull with usage. Increasing blade tension to force dull blades to cut
can cause the clipper to heat and reduce motor life, and further shorten blade
life. When the cutting blades no longer cut smooth and clean, sharpening is
necessary.
When sharpening blades becomes necessary, send blades to
SM
oranAuthorizedServiceCenter(seeservicemanualforlistings)where
approved methods, equipment and proper knowledge are used to restore the
original hollow-ground design and best cutting ability sharpening blades by
atgrindingoranymethodcontrarytothedesignandconstructionofOster
®
cutting blades is not recommended.
LUBRICATING THE BLADES
Alight�lmofoilshouldbemaintainedonthesurfaceofthecuttingblades.
Oiling the blades frequently while in use will help keep the blades cleaner.
Clean blades cut better. To clean blades, dip the teeth into Oster
®
Blade
Wash
®
cleanerwiththeclipperrunning.DONOTIMMERSETHECLIPPER.
Remove from the mixture and, while holding the clipper with the blade end
down, wipe the blades dry with a clean, dry cloth. Re-oil blades.
SAVE THESE INSTRUCTIONS
DO NOT USE THIS CLIPPER UNTIL YOU HAVE READ THESE OPERATING INSTRUCTIONS
A. Fine
B. Coarse
A
B
Loading ...
Loading ...
Loading ...