Loading ...
Loading ...
EN3
PLACING THE HOB
After the electrical connection (see the chapter “Electrical connection”) position each fixing clips on the dedicated slots on the lateral sides of the hob as shown in the
picture. Then push the hob inside the cut out and check that the glass is flat and parallel to the worktop. The fixing clips are designed for every type of worktop material
(wood, marble, etc).
IMPORTANT:
- Use protective gloves during hob installation
WARNING
- Install a separator panel under the hob;
- Do not fit the separator panel if an undertop oven is installed;
- The lower part of the product must not be accessible after installation;
min. 20 mm
IMPORTANT:
- The distance between the underside of the appliance and the separator panel
must respect the dimensions given in the figure;
- If an oven is installed under the hob, make sure the oven is equipped with a
cooling system;
- Do not install the hob above a dishwasher or washing-machine, so that the
electronic circuits do not come into contact with steam or moisture which could
damage them.
4x
Loading ...
Loading ...
Loading ...