Loading ...
Loading ...
Loading ...
7-35
SYSTEM SETTINGS
Contents
*1 When a finisher (large stacker) or saddle stitch finisher (large stacker) is installed.
*2 When a paper drawer is installed.
*3 When a finisher is installed.
*4 When a punch module is installed.
Copy Function Settings
Disabling of Finisher*
3
Disabled 7-70
Disabling of Offset Disabled 7-70
Disabling of Stapler*
3
Disabled 7-70
Disabling of Punch*
4
Disabled 7-70
l Fusing Control Settings 16 - 23 lbs. (60 - 89g/m
2
) 7-70
Item Factory default setting Page
n Copy Function Settings
7-71
l Initial Status Settings
7-71
Paper Tray Varies depending on the machine
configuration
Exposure Type Auto
Copy Ratio 100%
2-Sided Copy 1-Side to 1-Side
Output –
l Other Settings 7-72
Copy Exposure Adjustment 5 7-72
Rotation Copy Setting Enabled 7-72
Add or Change Extra Preset Ratios – 7-72
Setting a Maximum Number of Copies 999 7-72
Initial Margin Shift Setting
7-72 Side 1 1/2"
Side 2 1/2"
Erase Width Adjustment
7-72 Edge Clearance Width 1/2"
Center Clearance Width 1/2"
Card Shot Settings
7-72 Original Size X: 3-3/8", Y: 2-1/8"
Fit to Page Disabled
Initial Tab Copy Setting 1/2" 7-72
Disabling Deletion of Job Programs Disabled 7-73
Disabling of Bypass-Tray in Duplex Copy Disabled 7-73
Disabling of Auto Paper Selection Disabled 7-73
Item Factory default setting Page
Loading ...
Loading ...
Loading ...