Loading ...
Loading ...
Loading ...
E-9
WARNING : Turn off the unit before performing any cleaning or maintenance.
CLEANING THE FILTER
If the filter is clogged with dust, the amount of air flow will be reduced, resulting in poor
cooling performance. The filter should be cleaned for every 10 days. At the beginning of
every cooling season or if the air conditioner has not been used for a long period, clean the
filter before starting to operate the unit.
1.
CLEANING AND MAINTENANCE
OILING OF THE COMPRESSOR AND FAN MOTOR IS UNNECESSARY
3.
Air filter
Grille
REMOVE THE FILTER
Open the grille by gently pulling the arrow
marked portion. Then lift and unhook the
bottom of the air filter and remove it.
CLEAN THE FILTER
To remove dust from the filter, use a vacuum
cleaner or wash it with water.
If the filter is very dirty, wash it with detergent
and rinse carefully with water. Dry the filter
with a soft cloth. Do not expose the filter to
heat or dry it under direct sunlight.
RE-INSTALL THE FILTER
Fit the top hooks, and then hook the bottom of
the air filter. Close the grille firmly. Never
operate the unit without installing the filter or
the grille open. It may be resulted in serious
damage to the unit.
2.
CAUTION:
Do not open the grille extremely wide, or provide
stress to the opened grille. The grille may come
off, or the grille shaft may get damaged. If the
grille should come off, replace it by following
instructions given in page E-3 "CAUTION".
Air filter
Air filter
The compressor is permanently lubricated and is hermetically sealed. The fan motor
is lifetime sealed and does not require oiling.
CLEANING OF THE FRONT PANEL,GRILLE AND CABINET
To clean the front panel, grille and cabinet, wipe with a soft, dry cloth or with a cloth
moistened with a mild soap. Rinse carefully by wiping with a damp cloth and dry
completely.
Avoid splashing the unit with water. Excessive water will affect electrical insulation
and fire may be resulted during operation.
Never use erosive chemicals or abrasive cleaners on any part of the unit. To avoid
damaging the unit, do not use hot water of over 50°C when cleaning.
ENGLISH
Downloaded from: http://www.usersmanualguide.com/
Loading ...
Loading ...
Loading ...