User Manual Netgear EX7700-100NAS Ranges

Documents for Netgear EX7700-100NAS

User Manual

For EX7700-100NAS. Also, The document are for others Netgear models: EX7700

• Contents3
• 1. Overview5
  • Unpack Your Extender6
  • LEDs7
  • Back Panel9
  • When to Use Your Extender10
  • How the Extender Works10
• 2. Get Started11
  • Install the WiFi Extender12
    • Place the Extender and Apply Power12
    • Connect to an Existing WiFi Network12
      • Connect With WPS12
      • Connect With the NETGEAR Installation Assistant14
  • Use the Extender in Access Point Mode15
  • Connect a Device to the Extender Network16
    • Connect a Device to the Extender Network Using WiFi16
    • Connect a Device to the Extender Network Using WPS17
    • Connect an Ethernet-Enabled Device to the Extender17
  • Log In to the Extender After Installation17
  • Run Smart Setup Installation18
• 3. Extender Network Settings19
  • Enable or Disable One WiFi Name20
  • Enable or Disable Smart Connect21
  • View Connected Devices22
  • View WiFi Settings23
  • Change the WiFi Network Name23
  • Turn Off the SSID Broadcast to Create a Hidden Network24
  • Disable or Enable the WiFi Radios25
  • Change the WiFi Speed26
  • Use WPS to Add a Computer to the Extender’s WiFi Network26
    • Use WPS With the Push Button Method27
    • Use WPS With the PIN Method28
  • Deny Access to a Computer or WiFi Device28
  • Set Up an Access Schedule29
  • Change the Extender’s Device Name30
  • Set Up the Extender to Use a Static IP Address31
  • Configure a Router With Advanced MAC Settings to Work with Your Extender32
• 4. Maintain and Monitor the Extender34
  • Change the Extender Login User Name and Password35
  • Turn Password Protection Off and On35
  • Recover a Forgotten User Name or Password36
  • Automatically Adjust for Daylight Saving Time37
  • Manually Set the Extender Clock38
  • Back Up and Manage the Extender Configuration39
    • Back Up the Configuration Settings39
    • Restore the Configuration Settings40
  • Return the Extender to Its Factory Default Settings41
    • Use the Reset Button41
    • Log In and Reset the Extender to Factory Settings41
  • Update the Extender Firmware42
    • Check for New Firmware and Update the Extender42
    • Manually Upload Firmware to the Extender43
  • Restart the Extender Remotely44
  • Turn the LEDs On or Off45
• 5. FAQs and Troubleshooting47
  • FAQs48
  • Find the Extender’s IP Address49
  • Cannot Connect to the Extender49
  • Cannot Join a WiFi Network and Receive an Error Message50
  • Cannot Access mywifiext.net50
• 6. Supplemental Information52
  • Factory Default Settings53
  • Technical and Environmental Specifications54