Loading ...
Loading ...
Loading ...
4
USING THE APPLIANCE FOR THE FIRST TIME
1. SELECT A FUNCTION
When the oven is off, only the time is shown on the
display. Press and hold
to switch the oven on.
Turn the knob to view the main functions available on
the left-hand display. Select one and press
.
To select a sub-function (where available), select the
main function and then press
to confirm and go
to the function menu.
Turn the knob to view the sub-functions available on
the right-hand display. Select one and press
to
confirm.
2. SET THE FUNCTION
After having selected the function you require, you
can change its settings.
The display will show the settings that can be
changed in sequence.
TEMPERATURE/GRILL LEVEL
When the °C/°F icon flashes on the display, turn the
knob to change the value, then press
to confirm
and continue to alter the settings that follow (if
possible).
DAILY USE
1. SET THE TIME
You will need to set the time when you switch on the
oven for the first time.
The two digits for the hour will start flashing: Turn the
knob to set the hour and press
to confirm.
The two digits for the minutes will start flashing. Turn
the knob to set the minutes and press
to confirm.
Please note: To change the time at a later point, press and
hold for at least one second while the oven is o and
repeat the steps above.
You may need to set the time again following lengthy power
outages.
2. HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal.
Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.
Remove any protective cardboard or transparent film
from the oven and remove any accessories from inside
it.
Heat the oven to 200 °C for around one hour, ideally
using a function with air circulation (e.g. “Forced Air”
or “Convection Bake”).
Follow the instructions for setting the function
correctly.
Please note: It is advisable to air the room after using the
appliance for the rst time.
Loading ...
Loading ...
Loading ...