Loading ...
Loading ...
Loading ...
EN -17-
All repairing operations required for your machine should be carried out by our authorised service. If your machine
requires a repair or if you cannot remove the fault by the help of the information provided as follows:
•Unplug your machine.
•Turn the water faucet off.
FAULT POSSIBLE CAUSE TROUBLESHOOTING
Your machine does not
start.
It is not plugged. Plug it.
Fuse blown. Replace the fuses.
Electricity cut-off. Check mains power.
Start/pause button not pressed. Press on Start/Pause button
Programme dial ‘stop’ position. Switch the programme button to the
desired position.
The machine door is not completely
closed.
Close the machine door.
Your machine does not
intake water.
Water tap is turned off. Turn your faucet on.
Turn your faucet Check water inlet hose and untwist.
Water inlet hose clogged. Clean water inlet hose lters. (*)
Valve inlet lter clogged. Clean the valve inlet lters. (*)
The machine door not completely
closed.
Close the machine door.
(*) See the chapter regarding maintenance and cleaning of your machine.
FAULT POSSIBLE CAUSE TROUBLESHOOTING
Your machine does not discharge
water.
Discharging hose clogged or
twisted.
Check the discharging hose, then
either clean or untwist.
Pump lter clogged. Clean the pump lter. (*)
Laundry settled in the machine
unevenly.
Spread your laundry in the
machine evenly.
Your machine vibrates.
The feet of your machine have not
been adjusted.
Adjust the feet on your machine.
(**)
Safety stays tted for
transportation not disassembled.
Disassemble the safety stays of
your machine. (**)
Less amount of laundry in the
appliance.
This will not block operation of
your machine.
Your machine is overloaded
with laundry or laundry settled
unevenly.
Do not put in laundry more than
the amount recommended and
settle the laundry in the machine
evenly.
Your machine rests on a hard
surface.
Prevent your machine from resting
on hard surfaces.
(*) See the chapter regarding maintenance and cleaning of your machine.
(**) See the chapter regarding installation of your machine.
CHAPTER -10: TROUBLESHOOTING
Loading ...
Loading ...
Loading ...