Loading ...
Loading ...
Loading ...
EN -15-
Unplug your machine before starting the maintenance and cleaning of your machine.
Turn the tap water off before starting the maintenance cand cleaning of your machine.
CAUTION: Your machine’s parts might be damaged if cleaners with solvent agents are used. Do not
use cleaning materials with solvent agents.
WATER INLET FILTERS
Filters to avoid dirt and foreign substances in the water from penetrating into the machine are
available both on the side of faucet and on the ends of water valves along the water inlet hose of
your machine. If your machine cannot intake sufcient amount of water despite water faucet being
open, these lters should be cleaned. (It is recommended that you clean your pump lter once in
2 months.)
- Detach the water inlet hoses.
- Remove the lters on water inlet valves using pliers and then clean it with a brush in water.
- Disassemble the lters on the side of faucet side of water inlet hoses manually and clean it.
- Having the lters cleaned, you can t them in the same way reversely.
CAUTION:
Filters of water inlet valves may be clogged due to contaminated water faucet or lack of necessary
maintenance or valves may be broken down, causing water leaking into your machine continuously.
The breakdowns that may arise due to these reasons are out of the scope of warranty.
PUMP FILTER
A lter system which avoids threads remaining from your laundries and tiny materials from entering
into the pump during water discharging operation carried out by your machine after completing
washing so prolonging the lifecycle of your pump is available. It is recommended that you clean your
pump lter once in 2 months. To clean pump lter:
• To open the pump cover, you can use the powder detergent spade (*) or liquid detergent level plate
coming out of your machine.
• Fit the end point of the plastic part to the gap of the pump cover and push it back. This will open
the cover.
• Before opening the lter cover, settle a vessel in front of the lter cover to prevent the water
remained in the machine from owing on the ground.
• Loosen the lter cover in counter-clockwise and then empty water.
Note: You may have to empty the water collection vessel several times according to the amount of
water in the machine.
• Clean the foreign materials in the lter with a brush.
• After cleaning the lter, t the lter cover and tighten it by rotating it in clockwise direction.
• While closing the pump cover, ensure that the parts on the inner side of the cover to match the
holes on the front panel side.
• You can reattach the pump cover in the reverse order that you removed it.
WARNING!
As water in the pump may be hot, wait until it cools down.
(*) Machinery specications may vary depending on the product purchased.
DETERGENT DRAWER
Your detergents may deposit residue in detergent drawer and housing of detergent drawer over time. To clean the
residue formed, disassemble the detergent drawer in particular periods. It is recommended that you clean your
detergent drawer every 2 months. To eject the detergent drawer:
Pull the detergent drawer up to the end
CHAPTER -8: MAINTENANCE AND CLEANING OF YOUR
MACHINE
Loading ...
Loading ...
Loading ...