Loading ...
Loading ...
Loading ...
18
5 Maintenance
E If the descaling agent comes into contact
with sensitive surfaces (e.g. marble), damage
cannot be ruled out. Clean up any splashes
immediately.
Precondition:Your ENA is ready for use. The
Descaling symbol& lights up.
& T Touch the Descaling symbol for approxi-
mately 2 seconds.
The Coffee Grounds Container symbol?
lights up.
T Empty the drip tray and coffee grounds
container and reinsert them.
The Water Tank symbolM flashes.
T Remove and empty the water tank.
T Completely dissolve the contents of one
blister (three JURA descaling tablets) in a
receptacle holding 17 oz (500 ml) of water.
This may take several minutes.
T Pour the solution into the empty water tank
and reinsert the tank.
The Descaling symbol& lights up.
& T Touch the Descaling symbol.
The Y, <, > and & symbols flash and water
flows directly into the drip tray.
The operation is interrupted, the Coffee
Grounds Container symbol ? flashes.
T Empty the drip tray and coffee grounds
container and reinsert them.
The Water Tank symbolM lights up.
T Remove the water tank and rinse
thoroughly.
T Fill the water tank with fresh, cold water and
reinsert it.
The Descaling symbol& lights up.
& T Touch the Descaling symbol.
The Y, <, > and & symbols flash and water
flows directly into the drip tray.
The Y, < and > symbols flash and water
flows out of the coffee spout.
The operation is interrupted, the Coffee
Grounds Container symbol? lights up.
T Empty the drip tray and coffee grounds
container and reinsert them.
Your ENA is once more ready for use.
E If the descaling operation stops unexpec-
tedly, rinse the water tank thoroughly.
Descaling the machine without a prompt: You
can initiate the 'Descaling the machine' operation
manually at any time as long as the machine is
ready for use. Touch the ; and _ symbols at the
same time for approximately 2 seconds. The ;,
_, L and & symbols light up brightly. Continue
with the first prompt (indicated by T) as described
in this section.
Changing the filter
E After 2000 oz (60 liters) of water have flowed
through, the filter will cease to work. Your
ENA will automatically prompt you to
change the filter.
E After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
E If the CLEARYL Blue filter cartridge is not
activated in programming mode, you will
not be prompted to change the filter.
Precondition:Your ENA is ready for use. The Filter
symbol! lights up.
! T Touch the Filter symbol for approximately 2
seconds.
The Water Tank symbolM lights up.
T Remove the water tank.
T Open the filter holder and remove the old
filter cartridge.
Loading ...
Loading ...
Loading ...