Loading ...
Loading ...
Loading ...
Frequently Asked Questions
89
Water intake fault
Problem Possible cause and solution
All TimeControl function
controls are flashing
quickly.
The warning buzzer is
sounding.
One of the following
faults appears in the
display:
Water intake fault.
Please open the water sup-
ply
The water supply is turned off.
Turn on the water supply fully.
Water intake fault Before fixing the fault:
Turn the dishwasher off using the sensor.
There is a problem with the water intake.
Turn on the water supply fully and start the pro-
gram again.
Clean the water intake filter (see "Frequently asked
questions").
The flow pressure at the connection point is lower
than 7.25 psi.
Contact a plumber.
The following message
appears in the display
during the Energy Saver
program:
Water in. temp too low
The intake water has not reached the required tem-
perature of 120°F (45°C) (see "Water connection, Wa-
ter intake").
Start the program again.
If the fault message appears again, select a differ-
ent program.
Loading ...
Loading ...
Loading ...