Loading ...
Loading ...
Loading ...
Options
60
EcoStart
The EcoStart function allows you to take
advantage of time variable economy
rates of electricity. Before you can use
this option, you must set up to three
electricity rate time zones (see "Settings
menu - EcoStart").
You then set the latest time at which the
program selected should end.
The dishwasher will start automatically
in the cheapest rate zone within the
time set.
Use the arrow buttons to set the
hour and confirm with OK.
The hour will be saved and the minute
number block will be highlighted.
Use the arrow buttons to set the
minutes and confirm with OK.
The display will switch to the program
menu.
Close the door.
The left TimeControl function will start
flashing.
The estimated start time for the pro-
gram selected will appear in the display.
The selected program will start auto-
matically during the most cost effective
time zone. It will finish at the latest by
the set finish time.
Changing or deleting set times
You can change the set times or the
program before the start time in the dis-
play is reached.
Open the door.
Press the button.
Select the function for which you
want to change or delete the time.
After confirming the Change option, you
can change the set time.
After confirming the Delete option, the
set time will be deleted and the indi-
cator light will go out.
You can now select and start a pro-
gram.
If you open the door for more than
four seconds before the start time is
reached, the message Continue with OK
appears in the display. Confirm with
OK and close the door within four sec-
onds to restart the delay start.
Loading ...
Loading ...
Loading ...