Loading ...
Loading ...
Loading ...
Settings menu
76
Volume
A sequence of buzzer tones will sound
at the end of the program or if there is a
fault as long as the buzzer has been ac-
tivated.
Buzzer in the event of a fault
The buzzer in the event of a fault will
sound four times at intervals with a
short pause between each set of tones.
The buzzer which sounds when there
is a fault cannot be deactivated.
Buzzer at the end of a program
The buzzer at the end of a program will
sound four times at intervals with a
short pause between each set of tones.
Buzzer tones
The volume of the tone at the end of the
program can be selected in seven
stages or switched off.
Select the volume you want using the
Quieter and Louder options, or turn the
buzzer off.
Confirm with OK.
Night time buzzer tone
You can select a different volume for
the buzzer at night, or turn it off.
Select the volume you want for the
night time buzzer using the Quieter
and Louder options, or switch the
night-time buzzer off.
Confirm with OK.
Night time
You can select the times for night time
to begin and end.
Select the Start at option.
Use the arrow sensors to set the
time in hours and minutes for the
night time to begin and confirm both
with OK.
Select the Finish at option.
Use the arrow sensors to set the
time in hours and minutes for the
night time to end and confirm both
with OK.
Keypad tone
An audible tone sounds each time a
sensor button is pressed.
The volume for the keypad tone can be
set in seven stages or switched off.
Select the volume you want using the
Quieter and Louder options, or switch
the keypad tone off.
Confirm with OK.
Loading ...
Loading ...
Loading ...