Loading ...
Loading ...
Loading ...
Flat loading floor
The maximum load on the loading floor is:
330 lbs, 150 kg.
Access to storage area
A storage area for items like the partition net is
found under the loading floor.
1. Reach into the recess, arrow 1, on the rear
edge of the loading floor.
2. Lift the loading floor at the rear, arrow 1,
and fold it forward, arrow 2.
MINI Countryman:
MINI Paceman:
Before closing the tailgate, lower the loading
floor back onto the cargo area floor.
Removing
The loading floor can be removed if necessary.
1.
Fold up the loading floor.
2. Pull it back slightly and out of the holders.
3. Then remove it upward.
The folded loading floor can be stored in the
cargo area.
MINI Countryman: partition net
Before installing
1. Remove the pouch with the partition net
from the storage compartment under the
loading floor in the cargo area.
2. Take the partition net out of the pouch, un‐
roll it, and unfold it.
After use, fold and roll up the partition net
in the same manner and place it in the
pouch so that it can be stowed back under
the cargo floor panel. Ensure that hooks
and tensioning buckles do not rest on the
rod elements.
3. Unfold the partition net to the point where
the rod elements engage.
Installation behind the front seats
1.
Take out the cargo cover if necessary.
2. Fold down the rear seat backrests, refer to
Enlarging the cargo area.
3. Insert the retaining pins of the partition net
all the way into the front holders in the
headliner, arrow 1, and push forward.
4. Attach the hooks, arrow 2, at the bottom of
the retaining straps on both sides to the
eyelets on the vehicle floor. Firmly attach
the partition net.
5. Lash the partition net tightly. To do this,
tighten the retaining straps using the ten‐
sioning buckles.
Seite 104
CONTROLS
Interior equipment
104
Online Edition for Part no. 01 40 2 964 433 - VI/15
Loading ...
Loading ...
Loading ...