
Model: GH221/GH221X
20V 55cm
Cordless Hedge Trimmer
User Manual
CAUTION: Before using this tool, please read this manual completely, and follow all
operating safety measures.

EN 2
Original Instructions
S
AFETY & INTERNATIONAL SYMBOLS..........2
SAFETY INSTRUCTIONS....................................2
KNOW YOUR UNIT.............................................7
SPECIFICATIONS................................................8
ASSEMBLY...........................................................8
OPERATION........................................................10
MAINTENANCE..................................................12
TROUBLESHOOTING........................................14
SAFETY &
INTERNATIONAL
SYMBOLS
Explanation of Safety &
international symbols describes
safety and international symbols
and pictographs that may
appear on this product. Read the
operator’s manual for complete
safety, assembly, operating and
maintenance and repair information.
Caution / Warning.
To reduce the risk of injury, user
must read user manual.
Wear eye protection.
Wear ear protection.
Wear head protection.
DANGER – Keep hands away from
blade.
Do not use in rain or wet
conditions.
Wear safety footwear.
Wear protective gloves.
Keep bystanders a safe distance
away from the work area.
Indoor use only. Only use battery
charger indoors.
RCM Mark
Guaranteed sound power level.
Noise emission to the environment
according to the European
Community’s Directive.
Do not dispose of electrical
products with household waste.
Recycle through authorized
facilities.
SAFETY INSTRUCTIONS
ORIGINAL INSTRUCTIONS
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING!
Read all safety warnings, instructions,
illustrations and specifications, provided
with this power tool. Failure to follow
all instructions listed below may result
in electric shock, fire and/or serious
injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings
refers to your mains-operated (corded)
power tool or battery-operated
(cordless) power tool.

EN3
1) Work Area Safety
a. Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
b. Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
c. Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
2) Electrical Safety
a. Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified
plugs and matching outlets will
reduce risk of electric shock.
b. Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
c. Do not expose power tools to rain
or wet conditions. Water entering a
power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the battery charger.
Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of
electric shock.
e. When operating a power tool
outdoors, use an extension cord
suitable for outdoor use.Use of
a cord suitable for outdoor use
reduces the risk of electric shock.
f. If operating a battery charger in a
damp location is unavoidable, use a
residual
current device (RCD) protected
supply. Use of an RCD reduces the
risk of electric shock.
3) Personal Safety
a. Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired
or under the influence of drugs,
alcohol or medication. A moment of
inattention while operating power
tools may result in serious personal
injury.
b. Use personal protective equipment.
Always wear eye protection.
Protective
equipment such as a dust mask,
non-skid safety shoes, hard hat
or hearing protection used for
appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting.
Ensure the switch is in the off-
position before
connecting to power source and/or
battery pack, picking up or carrying
the tool. Carrying power tools
with your finger on the switch or
energising power tools that have the
switch on invites accidents.
d. Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a
rotating part of the power tool may
result in personal injury.
e. Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power
tool in unexpected situations.

EN 4
f. Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair and clothing away from moving
parts. Loose clothes, jewellery or
long hair can be caught in moving
parts.
g. If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of dust collection can reduce
dustrelated hazards.
h. Do not let familiarity gained from
frequent use of tools allow you to
become
complacent and ignore tool safety
principles. A careless action can
cause severeinjury within a fraction
of a second.
4) Power Tool Use And Care
a. Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
will do the job better and safer at
the rate for which it was designed.
b. Do not use the power tool if the
switch does not turn it on and
off. Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
c. Disconnect the plug from the power
source and/or remove the battery
pack, if detachable, from the power
tool before making any adjustments,
changing accessories, or storing
power tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
d. Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained
users.
e. Maintain power tools and
accessories. Check for misalignment
or binding of moving parts, breakage
of parts and any other condition
that may affect the power tool’s
operation. If damaged, have the
power tool repaired before use.
Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools
with sharp cutting edges are less
likely to bind and are easier to
control.
g. Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed. Use
of the power tool for operations
different from those intended could
result in a hazardous situation.
h. Keep handles and grasping surfaces
dry, clean and free from oil and
grease. Slippery handles and
grasping surfaces do not allow for
safe handling and control of the tool
in unexpected situations.
5) Battery Tool Use And Care
a. Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type
of battery pack may create a risk of
fire when used with another battery
pack.
b. Use power tools only with
specifically designated battery packs.
Use of any other battery packs may
create a risk of injury and fire.
c. When battery pack is not in use,
keep it away from other metal

EN5
objects, like paper clips, coins, keys,
nails, screws or other small metal
objects, that can make a connection
from one terminal to another.
Shorting the battery terminals
together may cause burns or a fire.
d. Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact accidentally
occurs, flush with water. If liquid
contacts eyes, additionally seek
medical help. Liquid ejected from
the battery may cause irritation or
burns.
e. Do not use a battery pack or
tool that is damaged or modified.
Damaged or modified batteries may
exhibit unpredictable behaviour
resulting in fire, explosion or risk of
injury.
f. Do not expose a battery pack or tool
to fire or excessive temperature.
Exposure to fire or temperature
above 130° C may cause explosion.
g. Follow all charging instructions and
do not charge the battery pack
or tool outside the temperature
range specified in the instructions.
Charging improperly or at
temperatures outside the specified
range may damage the battery and
increase the risk of fire.
6) Service
a. Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power
tool is maintained.
b. Never service damaged battery
packs.Service of battery packs
should only be performed by the
manufacturer or authorized service
providers.
HEDGE TRIMMER SAFETY
WARNINGS
a. Do not use the hedge trimmer in
bad weather conditions, especially
when there is a risk of lightning. This
decreases the risk of being struck by
lightning.
b. Keep all power cords and cables
away from cutting area. Power cords
or cables may be hidden in hedges
or bushes and can be accidentally
cut by the blade.
c. Wear ear protection. Adequate
protective equipment will reduce the
risk of hearing loss.
d. Hold the hedge trimmer by insulated
gripping surfaces only, because the
blade may contact hidden wiring.
Blades contacting a "live" wire may
make exposed metal parts of the
hedge trimmer "live" and could give
the operator an electric shock.
e. Keep all parts of the body away
from the blade. Do not remove cut
material or hold material to be cut
when blades are moving. Blades
continue to move after the switch is
turned off. A moment of inattention
while operating the hedge trimmer
may result in serious personal injury.
f. When clearing jammed material or
servicing the hedge trimmer, make
sure all power switches are off and
the battery pack is removed or
disconnected.Unexpected actuation
of the hedge trimmer while clearing
jammed material or servicing may
result in serious personal injury.
g. Carry the hedge trimmer by the
handle with the blade stopped and
taking care not to operate any power
switch. Proper carrying of the hedge
trimmer will decrease the risk of

EN 6
inadvertent starting and resultant
personal injury from the blades.
h. When transporting or storing the
hedge trimmer, always use the blade
cover. Proper handling of the hedge
trimmer will decrease the risk of
personal injury from the blades.
NOTE: Although all reasonable and
necessary safety measures have been
adopted in the design, production, and
testing of this power tool to minimize
potential risks, due to the inherent
characteristics of mechanical products
and the diversity of usage scenarios,
there may still be residual risks that
cannot be completely eliminated.
SAVE THESE INSTRUCTIONS
INTENDED USE
This cordless hedge trimmer is
intended for cutting and trimming
hedges and bushes in domestic areas.
It is not intended to be used for cutting
above shoulder level. Do not use it for
other purpose.

EN7
1 Blade Cover
2 Cutting Blades
3 Guard
4 Front Handle
5 Safety Switch
6 Rear handle
7 Motor Housing
8 Switch Trigger
KNOW YOUR UNIT

EN 8
SPECIFICATIONS
*X=0-999, A-Z may vary depending on the
sales region or package configuration, with no
safety-related changes between these models.
*20V Max battery, maximum initial battery
voltage (measured without a workload) is 20V.
The nominal voltage is 18V.
NOTE: The declared noise emission value(s)
and vibration total value(s) are measured in
accordance with a standard test method,
and may be used both for comparing tools
and for making a preliminary assessment of
exposure.
WARNING:
The noise and vibration
emissions during actual use of the power
tool may differ from the declared value(s),
depending on how the tool is used. To
protect the operator, hearing protection and
gloves should be worn under actual working
conditions.
Model GH221/GH221X*
Input Voltage 18 V (max 20 V)
Motor type Brushed
No-load speed 2300 /min
Cutting blade length 450 mm
Cutting capacity 20 mm
Weight (tool only) 2.42 kg
Measured Sound
Power Level LwA
92 dB(A)
K=1.5 dB(A)
Sound Pressure
Level at Operator's
Position LpA
84 dB(A)
K=3 dB(A)
Guaranteed Sound
Power Level LwA
(measured according
to 2000/14/EC)
95 dB(A)
Valuation of Vibration
(left hand and right
hand)
Main handle
=0.782 m/s
Front handle
=1.037 m/s²
Uncertainty
K=1.5 m/s2
ASSEMBLY
1. Unpack all parts and lay them on a flat,
stable surface:
2. Remove all packing materials and
shipping devices, if applicable.
3. The scope of delivery varies depending
on the country and purchased variant:
• Hedge trimmer
• Battery pack
• Charger
• Blade cover
• User manual
NOTE: The actual accessories supplied
may vary depending on the product model,
sales region, production batch, or package
configuration.
4. If you find that parts are missing or
show damage do not use the product
but contact MOVA customer service.
Using an incomplete or damaged product
represents a hazard to people and
property.
5. Ensure that you have all the accessories
and tools needed for assembly and
operation. This also includes suitable
personal protective equipment.
WARNING:
Wear protective gloves for
this assembly work and
always lay the product
on a flat and stable surface
while assembling. Follow the
assembly instructions step-by-step
and use the pictures provided
as a visual guide to easily assemble the
product! Do not insert thebattery pack
before the power tool is completely
assembled or adjusted!
ASSEMBLING THE FRONT
HANDLE
WARNING:
To avoid serious personal injury and damage

EN9
2. Secure the front handle with two screws.
3. Please make sure to secure the right-side
screw in the correct hole.
to the unit, shut the unit off before removing
or installing an attachment.
1. Align and insert the front handle.
REMOVING THE BLADE
COVER
Remove the blade cover before turning on
the machine.
It is recommended to cover the blade when
your work is finished.
INSTALLING/REMOVING THE
BATTERY PACK
WARNING: Make sure battery pack snaps
in place. Failure to securely seat the battery
pack could cause the battery pack to fall
out, resulting in serious personal injury.
WARNING: Use only the accessories
listed below. Using nonapproved accessories
may result in poor performance or safety
hazards.
Battery Pack GBA202, GBA204
Charger GCH202, GCH204, GCH206D
NOTE: For usage instructions of the battery
pack and charger, please refer to the
respective user manuals.
To install:
Align and slide the battery pack into the
slots of the battery docking port until it
locks in place.
To remove:
Press the unlock button of battery pack and
remove the battery pack from the product.
4. Press the switch trigger and check that
it returns smoothly and fully without
sticking, to prevent start-up failure.
5. Check if the handle is firmly seated to
avoid personal injury.
screw hole

EN 10
OPERATION
WARNING!
Always wear eye, hearing, hand, foot and
body protection to reduce the risk of injury
when operating this unit. Keep all parts of
your body away from the rotating cutting
attachment and hot surfaces.
Always use two hands to operate the
product. When operating, use your left hand
to hold the front handle while your right
hand to hold the rear handle.
SWITCHING ON/OFF
Hold the product as in working condition.To
start the product, press the switch trigger
and the safety switch at the front handle at
the same time.
To switch the product off, release the switch
trigger or the safety switch.
NOTE:
For safety reasons, both the safety switch
and the switch trigger must remain pressed
during the entire operation.
GENERAL
WARNING!
Always lubricate the cutting blade with
protective spray before use and storage.
1. Double check that all parts are properly
fixed.
2. Check the product as well as accessories
for damage before each use. Do not use
the product if it is damaged or shows
wear.
3. Ensure that the air vents are always
unobstructed and clear. Clean them if
necessary with a soft brush. Blocked
air vents may lead to overheating and
damage the product.
4. Wear eye, hearing, hand, foot and body
protection.
5. Always hold the product on its handles.
Keep the handles dry and free from
lubricant to ensure safe holding.
6. Keep your body and feet in safety
distance to cutting head.
7. Inspect the area to be cut and remove
any foreign objects that will influence
your cutting. If the foreign objects can
not be removed, e.g. wire fences, please
mark and remember it to avoid toughing
them during cutting.
8. Run the machine to top speed before
cutting.
9. Switch the product off immediately if
you are disturbed while working by other
peopleentering the working area. Always
let theproduct come to complete stop
before putting it down.
10. Do not overwork yourself. Take regular
breaks to ensure you can concentrate on
the work and have full control over the
product.

EN11
NOTE:
In some countries regulations define at what
time of the day and on what special days
products are allowed to be used and what
restrictions apply! Ask your community
for detailed information and observe the
regulations in order to preserve a peaceful
neighborhood and avoid committing
administrative offences.
This hedge trimmer is intended to be used
by the operator at ground level and should
not be used by the operator on ladders or
any other unstable support.
CUTTING TIPS
WARNING!
Never cut near electric cords or lines. If
blade jams on any electrical cord or line,
DO NOT TOUCH THE BLADE! IT CAN
BECOME ELECTRICALLY LIVE AND VERY
DANGEROUS.
Continue to hold the hedge trimmer by the
insulated rear handle or lay it down and
away
from you in a safe manner. Disconnect the
electrical service to the damaged line or
cord
before attempting to free the blade from the
line or cord. Contact with the blade, other
conductive parts of the hedge trimmer,
or live electric cords or lines will result in
death by
electrocution or serious injury.
• Clear the area to be cut before each use.
Remove all objects such as cords, lights,
wire, or loose string which can become
entangled in the cutting blade and create
a risk of serious personal injury.
• Before starting the hedge trimmer, hold
the unit with both hands with the cutting
blades directed away from you. Always
use the hedge trimmer properly.
• Do not force the hedge trimmer through
heavy shrubbery. This can cause the
blades to bind and slow down. If the
blades slow down, reduce the pace.
• Do not try to cut stems or twigs that
are larger than 3/4 in. thick, or those
obviously too large to feed into the
cutting blade. Use a non-powered hand
saw or pruning saw to trim large stems.
• If blades do become jammed, stop
the product, allow the blades to stop
and remove the battery pack before
attempting to remove the obstruction.
• Always hold hedge trimmer with both
hands when operating. Use a firm grip
on the handles. Never hold shrubs with
one hand and operate the hedge trimmer
with the other. Improper operation of the
hedge trimmer could result in serious
injury. The unit is used for cutting in
either direction in a slow, sweeping action
from side to side.
• Wear gloves when trimming thorny or
prickly growth. When trimming new
growth, use a wide sweeping action, so
that the stems are fed directly into the
cutting blade. Older growth will have
thicker stems and will be trimmed easiest
by using a sawing movement.
• The risk of the operation may occurs,
such as the sharp tree branches may cut
the user's skin, the blade of the unit may
hurt the user's body. Always wear eye,
hearing, hand, foot and body protection to
reduce the risk of injury when operating
this unit.
OVERHEAT PROTECTION
When the tool/battery is overheated, the
tool stops automatically. In this situation, let
the power tool/battery cool before turning
the tool on again.
OVERDISCHARGE
PROTECTION
When the battery capacity is not enough,

EN 12
the tool stops automatically. In this case,
remove the battery from the tool and charge
the battery.
MAINTENANCE
WARNING!
Always allow the blades of the hedge
trimmer to come to a complete stop and
pull out the battery pack before lubricating.
Failure to do so could result in accidental
starting causing possible serious personal
injury.For easier operation and longer blade
life, lubricate the hedge trimmer blade
before and after each use.If you will not be
using the hedge trimmer for an extended
time, it is advisable to oil the blade
periodically.Stop the hedge trimmer. Pull out
the battery pack from the product. Lay the
hedge trimmer on a flat surface and apply
light weight machine oil along the edge of
the top blade.
SHARPENING THE BLADE
WARNING!
During the maintenance, users should
take care of their safety. Always wear eye,
hearing, hand, foot and body protection to
reduce the risk of injury when operating
this unit. And check the unit that it can
work normally after the maintenance. If any
deterioration occurs,
follow the maintenance according to this
manual !
NOTE:
Allow the blades of the hedge trimmer to
come to a complete stop in the position
shown. This will allow clearance for the file
between the cutter teeth and the guard
teeth.
Remove and pulling out the battery pack
from the product.
Clamp the blade assembly in a vise and file
the exposed cutting surface of each blade
tooth with an 8 in. Smooth round file, 1/4
in. or 7/32 in. in diameter. Be sure to retain
the original angle of the tooth when filing.
In order to file both sides of each cutter
tooth, you may need to momentarily run
the hedge trimmer until the opposing side
of the cutter teeth are exposed. Do not run
the hedge trimmer while it is locked into the
vise. Make sure all tools for sharpening have
been removed before installing the battery.
Remove the battery pack and repeat the
sharpening process for the newly exposed
teeth.

EN13
CLEANING
Switch the product off, pull out the battery
pack from the product.Use a small brush
to clean the outside of the unit. Do not
use strong detergents. Household cleaners
that contain aromatic oils such as pine and
lemon, and solvents such as kerosene, can
damage plastic. Wipe off any moisture with
a soft cloth.
NOTE:
If the cutting blade is blocked by foreign
objects during the operating, stop the
product, wait for the cutting blade stops
entirely, remove the foreign objects and
clean the cutting blade.
TRANSPORT
• Clean the product as described above.
• Install the blade cover during the
transport.
• Always carry the product by its handle.
• Protect the product from any heavy
impact or strong vibrations which may
occur during transportation in vehicles.
• Secure the product to prevent it from
slipping or falling over,damage or injury.
STORAGE
• Clean the product as described above.
• Store the product and its accessories in a
dark, dry, frost-free, well-ventilated place.
• Always store the product in a place that
is inaccessible to children. The ideal
storage temperature is between 0°C-25°C
(32° F-77° F).
• We recommend using the original package
for storage or covering the product with
a suitable cloth or enclosure to protect it
against dust.
NOTE:
To prolong battery life, never store battery
pack in a completely discharged condition.
Make sure the battery pack is charged once
per year or when the LED indicator shows
only one light.
DISPOSAL
Waste product should not be disposed of
with household waste. Please recycle where
facilities exist.Check with your local
authority or retailer for recycling advice.
During the operation, the leaves or tree
branches may be cut by the unit, users
should clean these objects to protect
environment.
Electrical products should not
be discarded with household
products. Used electrical products
must be collected separately
and disposed of at collection
points provided for this purpose.
Talk with your local authorities
or dealer for advice on recycling.

EN 14
PROBLEM POSSIBLE CAUSE SOLUTION
Product does not
start
Battery pack not
properly attached
Attach properly
Battery pack capacity
too low
Remove and charge battery
pack
Battery pack damaged
Check by a specialist
electrician
Switch trigger or safety
switch not
set on ON position
Refer to chapter “SWITCHING
ON/OFF”
Product does not
reach full power
Battery pack capacity
too low
Charge battery pack
Air vents are blocked Clean the air vents
Result is
unsatisfactory
Cutting attachment is
worn
Replace with a new one
Vibration or noise is
excessive
Bolts/nuts are loose Tighten bolts/nuts
Product suddenly
stops
Battery pack capacity
too low
Remove and charge battery
pack
Battery too hot
Remove battery pack and let it
cool down
TROUBLESHOOTING
Suspected malfunctions are often due to causes that the users can fix themselves.
Therefore, check the product using this section. In most cases the problem can be solved
quickly.

EN15
WARRANTY POLICY
• During the warranty period, if the product exhibits manufacturing defects (excluding
damage caused by improper use or mishandling), you may contact the MOVA after-sales
service team for support. Upon confirmation of the defect by our technicians, you will be
eligible for complimentary repair or replacement under the warranty terms.
• The warranty is only applicable to the original purchase from an authorized MOVA retailer.
• The warranty period may vary by country/region and is subject to local laws and
regulations.
Warranty period
- Personal and Household Use
• 20V, 40V Garden tools (e.g., lawn mowers, hedge trimmers): 3-year limited warranty from
the date of purchase.
• 20V, 40V Battery system (e.g., chargers, battery packs): 2-year limited warranty from the
date of purchase.
• Maintenance parts/accessories: not covered under the limited warranty.
Professional Use: For commercial, agricultural, and institutional applications: 30-day limited
warranty from the date of purchase.
During the warranty period, the following situationsare not covered under the warranty:
1. Products used for rental purposes.
2. Products whose serial number, factory label, and other identifiers have been torn off or
altered.
3. No valid purchasing document (receipt, invoice, or other) is provided to certify the date
the product was purchased.
4. Maintenance parts/accessories, including but not limited to: lawn mower blades, trimmer
blades, grass bag, mulching insert, grass trimmer head, wheels, brush cutter blade, saw
chain, belts, skid shoes, scraper bar, shear bolts, blower tube nozzles, and other similar
accessories.
5. Defects caused by normal wear and tear or normal product aging. This includes but is
not limited to scratches, dents, paint peeling, or any corrosion or discoloration caused by
overheating, abrasives, and chemical cleaners.
6. Damage caused by:
- Abuse, overloading, misuse, or unauthorized modification.
- Natural disasters, accidents, or other force majeure events.
7. Malfunctions resulting from failure to operate the product according to its instructions,
specifications, or guidelines, or due to improper maintenance, care, or storage.
8. Failures due to the use of unauthorized accessories.
9. Failures caused by repairs made by an unauthorized service center or tampering with the
product by individuals without permission from MOVA.
The warranty covers only the repair of defects specified in these terms. Any other claims
are excluded. Please note: No full unit replacement service will be provided during repairs.
MOVA reserves the right to amend these terms and retains final authority over warranty
interpretation, subject to applicable laws.
For more warranty information, please visit the official website: https://www.mova.tech
CONTACT US
https://www.mova.tech/pages/contact-us

Manufacturer: Lawnix Technology (Nanjing) Co., Ltd.
Address: Room 501-510, 5/F, Block E (Building 2), No.10 Mozhou East Road, Jiangning
Development Zone, Jiangning District, Nanjing, Jiangsu Province, P.R.China
Made in China
