User Manual
Dummy Camera with Solar Powered Flood Light
IP66 Waterproof
Motion Detection
Solar Power
Product Information
2
Solar Panel
Dummy Antenna
8 pcs LED Lights
PIR Motion Sensor
Red LED Light
Power Button
1
2
3
4
6
5
1
2
3
4
5
6
3
Test the Lights
First thing first, let’s check the lights before drill
holes and install the lights on the wall.
1. Press and hold the power button for 3 seconds to
turn on the lights. You could find the power button on
the back of the solar panel.
4
2. Fully cover the solar panel by putting the solar light
upside down on a table.
5
1
2
3
If it works well, you will observe
a red light.
Wave your hand in front of the light.
The light will detect your movement
and turn on.
6
IMPORTANT: Don’t aim the lights towards people or
to yourself when you test the lights! Looking directly at
the lights from a very short distance may cause eye
discomfort!
7
4. If you don’t see any red light, put the lights under the
sun for at least 2 hours (4 hours if it’s cloudy or even
longer for rainy or snowy days) to charge the battery.
2 HOURS
8
Optimal Installation Position
Please make sure that the position that you choose
for your solar lights can get enough sunshine. The
optimal solar recharging time is 4 to 6 hours every day
to ensure the best performance at night or during the
bad weather days.
Optimal Detection Range: ~20ft
Optimal
Installation
Height:
~10ft
9
Technical Data
LED Power 5W
LED Luminous Flux 800LM
Battery Volume 2600mAh
Optimal Working Temperature 15°F - 140°F
Size 7*3*5 inches
Weight 1.3lb
Waterproof Level IP66 (Against heavy
rain or snow)
10
Warranty Information
Techage engages to provide the best products and
services for our customers. All Techage products have a
One-Year Quality Warranty. If you have any questions
or meet any trouble using our products, feel free to
contact us. Our professional customer service team will
help you ASAP.
Our Customer Service E-mail: [email protected]
