User guide.
WARNING! To reduce the risk of serious injury, read the
User Guide before operating your nutribullet
Turbo
™
Personal Blender. Save these instructions. Be sure anyone
who uses the nutribullet
®
knows how to do so safely.
2
PERSONAL SAFETY:
Failure to follow all instructions regarding
the use of your nutribullet Turbo
™
may
result in serious personal injury, death, or
property damage. Be aware of possible
hazards when using or storing your
nutribullet Turbo
™
.
WARNING! NEVER BLEND
HOT, WARM, OR CARBONATED
INGREDIENTS OR LIQUID IN THE
NUTRIBULLET
®
CUP! SUCH USE
MAY OVER-PRESSURISE THE
NUTRIBULLET
®
CUP, CAUSING THE
CUP TO SEPARATE VIOLENTLY WHEN
REMOVED FROM THE MOTOR BASE
OR OPENED, WHICH MAY RESULT
IN BODILY INJURY FROM THE HOT
CONTENTS OR EXPOSED BLADES.
• DO NOT blend hot or warm
ingredients.
- Starting with hot or warm
ingredients allows more heat and
pressure to build inside the Cup
when blending. This may cause
the Cup to separate, expelling hot
contents or exposing the Blade,
both of which may cause injury.
Important safeguards.
When operating your nutribullet
Turbo
™
Personal Blender, remember:
SAFETY COMES FIRST.
WARNING! To avoid the risk of serious injury, death, property damage or damage to
your device carefully read all instructions before operating your nutribullet
Turbo
™
Personal Blender. When using any electrical appliance, basic safety precautions should
always be observed, including the following important information. READ
CAREFULLY AND THOROUGHLY BEFORE OPERATING.
If you let anyone else use your nutribullet
Turbo
™
Personal Blender, make sure that
they understand the health and safety information in this User Guide, as well as any
additional safety or usage instructions provided. Each person using a device should
completely read the User Guide and become familiar with the safe operation of the unit.
- Only blend room temperature
or refrigerated ingredients
(21°C/70°F or cooler).
• DO NOT blend for more than
one minute.
- Blending causes ingredients
to heat up, which builds pressure
in the Cup over time. Continuous
blending for more than one
minute may cause the Cup to
separate, exposing the Blade,
or expel heated contents,
causing injury.
- DO NOT run for more than 3
consecutive 45-second intervals
to prevent the contents from
overheating and pressurising.
Allow contents to settle at least
10 to 20 minutes after running
multiple consecutive extraction
cycles. DO NOT attempt to open
the Cup if it feels hot or warm
to the touch. See Cup Caution
section for details.
• DO NOT blend anything carbonated
or eervescent — no bubbles.
- Carbonated and eervescent
ingredients (e.g. soda, baking
!
Save these instructions!
FOR HOUSEHOLD USE ONLY
43
• Do not remove the Cup while the unit
is in operation.
• Periodically inspect your nutribullet
Turbo
™
Personal Blender components
for damage or wear that may impair
proper function or create a
safety hazard.
• Do not use the Cup if you detect
cracking, cloudiness, or other
damage. You may purchase new
Cups at bulletbrands.com.au /
bulletbrands.co.nz or by contacting
Customer Service.
• NEVER operate your nutribullet
Turbo
™
Personal Blender if the
Cup is empty.
• Do not overfill Cup with ice. Always
use sucient liquid ingredients
when blending.
• Do not place on the bottom rack
or use the heat/sanitise cycle of
your dishwasher to wash the Cup
or To-Go Lids.
• Cups and To-Go Lids are NOT
microwave safe.
• Do not use the Rapid Extractor Blade
as a storage lid as the blended
mixture can ferment, increasing
pressure within the Cup that may
cause the Cup and Blade to separate,
potentially resulting in bodily injury
and property damage. Use the To-Go
Lid or transfer to a vented container
for storage after blending.
• Do not use after market replacement
parts for your nutribullet
Turbo
™
Personal Blender. Use of after market
replacement parts may result in
damage to your nutribullet
®
or
create safety hazards resulting in
bodily injury or damage. Only order
replacement parts from
nutribullet or by contacting Customer
Service at: bulletbrands.com.au /
bulletbrands.co.nz or by contacting
Customer Service: AU: 1300 285 538
/ NZ: 0800 232 633, please specify
the model for parts that are
compatible with your unit.
RAPID EXTRACTOR
BLADE SAFETY:
WARNING! BLADES ARE SHARP!
HANDLE WITH CARE TO AVOID
BODILY INJURY. NON-FOOD ITEMS
OR HARD INGREDIENTS MAY
DAMAGE THE BLADES. ROUTINELY
INSPECT THE BLADES AND
DISCONTINUE USE IF DAMAGED.
CONTINUED USE WITH A DAMAGED
BLADE OR USE INCONSISTENT WITH
THESE INSTRUCTIONS MAY RESULT
IN BODILY INJURY, PROPERTY
DAMAGE, OR DAMAGE TO
YOUR UNIT.
• Do not touch the sharp edges of
the blades. To avoid laceration
injury, do not handle or touch any
blade edge.
• NEVER store any exposed Rapid
Extractor Blade in the Motor Base
unattached to a nutribullet
®
Cup.
An exposed blade can present a
laceration hazard.
• ALWAYS securely tighten the Rapid
Extractor Blade to the Cup to
prevent leakage.
• Do not attempt to disengage the
Cup from the Motor Base if the Cup
starts to leak during blending. Allow
the motor to come to a complete
stop before removing the Cup.
• Do not crush ice. Your nutribullet
Turbo
™
Personal Blender is not
intended to be used as an
ice crusher.
• DO NOT LEAVE ANY NON-
FOOD ITEMS IN THE CUP WHEN
BLENDING. REMOVE ALL UTENSILS
FROM THE CUP.
• Do not blend stone fruit in this
appliance unless pits/seeds have
been removed. Fruit pits may
damage the Cup, potentially
resulting in shattering and personal
injury. In addition, apple seeds and
the pits of cherries, plums, peaches,
and apricots contain a chemical
known to release cyanide into the
body when ingested.
powder, baking soda, yeast, some
batters, cake mix, dry ice, or
other things that become bubbly)
release gasses that increase
pressure. Pressure from
released gases can cause a
sealed nutribullet
®
Cup to
burst, resulting in possible injury
and/or property damage.
Note: Some protein powders
include eervescent ingredients.
Always check the ingredients of
all supplements before adding.
• DO NOT overfill.
- Filling above the MAX line can
result in leakage. The cyclonic
action of the nutribullet
®
requires
space to extract eectively.
Exceeding the MAX line can result
in leakage and may create a
dangerous pressurisation which
can cause the Cup and Rapid
Extractor Blade assembly
to separate.
• DO NOT leave blended foods inside
sealed Cup.
– Blended mixtures can spoil
and ferment, increasing pressure
when left inside the Cup.
– Use the To-Go Lid or transfer
to another container for storage
after blending.
CUP CAUTION:
WARNING! NEVER ATTEMPT TO
OPEN A SEALED NUTRIBULLET
®
CUP IF IT FEELS HOT OR WARM TO
THE TOUCH. THE CONTENTS MAY BE
HEATED AND PRESSURISED, WHICH
CAN CAUSE THE CUP TO VIOLENTLY
SEPARATE WHEN OPENED,
POTENTIALLY RESULTING IN
BODILY INJURY. IF THE CUP
FEELS HOT OR WARM, TAKE THE
FOLLOWING STEPS:
1. LEAVE ALONE, DO NOT OPEN.
Leave the Cup where it is and
do not touch it or allow another
individual to touch. DO NOT attempt
to disengage the Cup from the Motor
Base or separate the Cup from the
Rapid Extractor Blade by applying
heat, force, or prying apart the
components, which may crack
or shatter the Cup and result in
bodily injury.
2. Do not continue to blend.
3. Allow the Cup to cool for at least
30 minutes.
4. After 30 minutes, check if the Cup is
completely cooled. If still warm, allow
to cool more.
5. If cool to the touch, slowly disengage
the Cup from the Motor Base.
6. With the Cup pointed away from
your face and body, use a towel to
slowly untwist the Cup from the Rapid
Extractor Blade and gently release
any residual pressure.
WARNING! IF YOU ARE STILL
UNABLE TO REMOVE THE CUP FROM
THE RAPID EXTRACTOR BLADE,
CONTACT CUSTOMER SERVICE. IF
YOU ARE UNABLE TO UNTWIST THE
CUP FROM THE RAPID EXTRACTOR
BLADE, NEVER LEAVE THE SEALED
CONTENTS OUT FOR A PROLONGED
PERIOD OF TIME. THE CONTENTS
MAY FERMENT CAUSING THE CUP
TO VIOLENTLY SEPARATE, WHICH
CAN RESULT IN IN BODILY INJURY OR
PROPERTY DAMAGE. DISPOSE OF
THE CUP AND CONTENTS PROPERLY
SO YOU OR OTHERS WILL NOT BE
INJURED IF FERMENTATION CAUSES
THE CUP TO SEPARATE.
CUP SAFETY:
• Always make sure the Cup is securely
locked on the Motor Base before
blending. The motor will not turn
on unless the Cup is set in the
locked position.
• Do not exceed the MAX line.
Exceeding the MAX line can result
in leakage.
65
• Do not attempt to clean by
immersing in water or other cleaning
liquids. Only gently wipe and dry
with a clean cloth.
• Do not place any of the nutribullet
Turbo
™
Personal Blender parts in a
microwave, conventional oven, air
fryer or stovetop pot, or immerse in
boiling water, as this will damage
the part.
• NEVER use the sanitise or
heat cycle on any nutribullet
®
part or
accessory. This may cause warping
and possibly hazardous conditions.
• NEVER place a nutribullet
®
Cup
in the freezer or use the Cup as a
storage container in the freezer.
• Make sure your nutribullet
Turbo
™
Personal Blender is powered o and
the motor and blades are completely
stopped before removing or
cleaning unit.
• DO NOT USE OUTDOORS.
• ALWAYS UNPLUG THE
NUTRIBULLET
®
WHEN NOT IN USE.
• Do not use the unit in locations with
dierent electrical specifications or
plug types.
• DO NOT USE THE UNIT WITH A
VOLTAGE CONVERTER DEVICE
AS IT MAY CAUSE ELECTRICAL
SHORTING, FIRE, OR ELECTRIC
SHOCK, RESULTING IN PERSONAL
INJURY OR PRODUCT DAMAGE.
• Do not use the unit in an area that
is wet or anywhere it could
become wet.
• Do not attempt to to plug the unit
into an electrical outlet with
wet hands.
• Do not use if the cord, plug, or Motor
Base was immersed in water or
other liquids.
• Do not modify the electrical cord in
any way.
• Do not operate with a damaged
electrical cord or plug. The electrical
cord and plug are not suitable
for replacement. If damaged, the
appliance should be replaced.
Contact Customer Service for
assistance at AU: 1300 285 538 /
NZ: 0800 232 633
• Do not allow or place the electrical
cord near or touching any hot
surfaces, heat source, or flame,
including the stove.
• Do not allow the electrical cord to
hang over the edge of the table
or counter.
• Do not pull, twist, or damage the
power cord.
• Overloading the Cup with ice or other
hard ingredients, or use without
sucient liquids may overheat the
motor and engage the thermal
breaker. If the internal thermal
breaker shuts o the motor, unplug
the Motor Base and let it cool for
an hour before attempting to use it
again. The thermal breaker will reset
when the unit is unplugged and the
thermal breaker cools down.
• Always POWER OFF and
DISCONNECT the nutribullet
Turbo
™
Personal Blender when it is not in use,
and when assembling, disassembling,
changing accessories, or cleaning.
• Use of incompatible parts or
aftermarket parts may result in
damage to your nutribullet
Turbo
™
Personal Blender or
create safety hazards that may
cause personal injury or damage.
When ordering replacement parts
always use genuine nutribullet
®
parts and accessories from
bulletbrands.com.au /
bulletbrands.co.nz or contact
Customer Service at AU: 1300 285 538
/ NZ: 0800 232 633.
VENTILATION:
• NEVER obstruct the ventilation
openings on the bottom of the
Motor Base of your nutribullet
Turbo
™
Personal Blender. Openings
on the bottom of the Motor Base
should be free of dust or lint and
never obstructed. Obstructing the
ventilation openings may overheat
• DO NOT USE the Rapid Extractor
Blade for grinding dry ingredients
such as grains, cereal, or coee, as
this may damage the motor and/or
the blade.
• Do not remove the Cup until blades
have come to a complete stop.
Removing before the blades come to
a complete stop can cause damage
to the Rapid Extractor Blade
coupling or motor gear.
• Always UNPLUG the unit when
assembling, disassembling,
changing accessories, or cleaning.
• Do not overload the Cup by
exceeding the MAX line. The blades
may stop turning if the Cup is
overloaded. If this occurs, turn o
the unit, empty contents down to the
Max line, reattach the Cup, and
resume blending.
• AVOID CONTACT WITH MOVING
PARTS! Keep hands and utensils out
of and away from the Blade while
blending to reduce the risk of
severe personal injury or damage
to the unit.
• NEVER place the Rapid Extractor
Blade on the bottom rack or use
the heat/sanitise cycle of your
dishwasher when cleaning.
• PERIODICALLY INSPECT THE
BLADES FOR DAMAGE. DO NOT
USE THE RAPID EXTRACTOR BLADE
IF THE BLADES DO NOT ROTATE
FREELY OR IF THE GASKET IS
MISSING OR DAMAGED.
• We recommend replacing at least
every Rapid Extractor Blade every
12 to 18 months unless damaged or
does not rotate freely.
GENERAL USE AND SAFETY:
WARNING! FAILURE TO FOLLOW
ALL INSTRUCTIONS REGARDING
THE USE OF YOUR NUTRIBULLET
TURBO
™
PERSONAL BLENDER MAY
RESULT IN SERIOUS PERSONAL
INJURY, DEATH, OR PROPERTY
DAMAGE. BE AWARE OF POSSIBLE
HAZARDS WHEN USING OR
STORING YOUR NUTRIBULLET
TURBO
™
PERSONAL BLENDER.
• NEVER blend hot, warm, or
carbonated beverages. This may
pressurise contents, causing them to
erupt upon opening, which can result
in serious bodily injury or property
damage.
• Do not use this blender for anything
other than its intended use
• Close supervision is necessary when
any appliance is used by or near
children to ensure they do not play
with the appliance. Keep cord out of
reach of children.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory, or mental
capabilities, or lack of experience and
knowledge, unless they are closely
supervised and instructed concerning
use of the appliance by a person
responsible for their safety.
PRODUCT SAFETY:
• NEVER LEAVE THE NUTRIBULLET
®
UNATTENDED WHILE IT IS IN USE.
• Do not place your nutribullet
®
blender
on uneven or unstable surfaces.
• Do not operate if the Motor Base,
Cup, or Blade are damaged in any
manner. Contact Customer Service
for assistance at: AU: 1300 285 538 /
NZ: 0800 232 633.
• Use only genuine nutribullet
®
attachments/accessories specifically
designed for your nutribullet
Turbo
™
Personal Blender. Aftermarket
parts are not made to nutribullet
®
specifications and may damage your
unit or cause serious injury.
• The risk of fire, shock or damage to
nutribullet
Turbo
™
Personal Blender
during cleaning can be reduced by
taking the following precautions:
- Unplug and turn your device o
before cleaning.
- Only clean the exterior of
your device.
- Clean your device with a dry cloth.
87
Contents.
01 Important safeguards
10 Assembly
11 Using your nutribullet Turbo
™
Personal Blender
15 Troubleshooting
16 Care & maintenance
19 Replacement parts
20 nutribullet
Turbo
™
Personal Blender
one-year limited warranty
Thank you for purchasing the nutribullet Turbo
™
Personal Blender.
the motor and result in a fire,
increasing the risk of
serious personal injury, death, or
property damage.
• ALWAYS operate the nutribullet
®
on a level surface, leaving
unobstructed space beneath and
around the Motor Base to permit
proper air circulation. Slots on
the bottom of the Motor Base are
provided for ventilation to ensure
reliable operation and to prevent
motor overheating.
• NEVER place your nutribullet
Turbo
™
Personal Blender on top
of flammable materials such as
newspapers, tablecloths, napkins,
dishtowels, place mats, or other
similar types of materials.
MEDICAL SAFETY:
WARNING! ALWAYS CONSULT
YOUR PHYSICIAN REGARDING
HEALTH AND NUTRITION CONCERNS
AND ADVICE. THE INFORMATION
CONTAINED IN THIS USER GUIDE,
ACCOMPANIED RECIPE GUIDE,
AND/OR ONLINE RECIPES ARE
GENERAL SUGGESTIONS AND
IDEALS AND ARE NOT MEANT
TO REPLACE THE ADVICE OF
YOUR PHYSICIAN.
• MEDICATION INTERACTIONS
If you are taking any medication,
especially cholesterol-lowering
medication, blood thinners, blood
pressure drugs, tranquilisers, or
antidepressants, please check with
your physician before trying any of
the smoothie recipes contained in
the online recipes.
• Periodically inspect your
nutribullet
Turbo
™
Personal
Blender components for damage
or wear that may impair proper
function or present a danger or
safety hazard. Discontinue use if
you detect cracking, cloudiness,
or damage to the Cups or other
parts. Ensure that the blades to the
Rapid Extractor Blade rotate freely
and that gasket is not missing or
damaged. Make sure that the Motor
Base is unobstructed and clean.
Follow maintenance instructions
in this user guide on pages 16-19.
Never operate your nutribullet
Turbo
™
Personal Blender with
damaged parts or components.
If your nutribullet
Turbo
™
Personal
Blender malfunctions or is damaged
or compromised in any way,
immediately discontinue use and
contact customer service at
AU: 1300 285 538 / NZ: 0800 232 633
with any comments, questions,
or concerns.
Save these
instructions!
!
109
Assembly guide.
nutribullet
®
cup
rapid extractor blade
motor base
suction cup feet
Note: dierent nutribullet
®
configurations may come with
dierent configurations.
1211
PLEASE KEEP
THESE IMPORTANT
SAFEGUARDS IN
MIND WHEN USING
THE NUTRIBULLET
®
:
Using your
nutribullet
Turbo
™
Personal Blender.
Creating too much pressure
in the nutribullet
®
Cup can
result in injury from hot
contents, flying components,
or blade exposure.
• DO NOT blend hot or
warm ingredients,
carbonated liquids, or
eervescent ingredients.
• Do not overfill the Cup.
• DO NOT blend ingredients
for more than one minute.
• Do not store blended foods
in sealed Cup.
• DO NOT run for more than
3 consecutive 45-second
intervals to prevent the
contents from overheating
and pressurising. See
Avoid Heating and
Over-Pressurising Cup
(pg. 2) for details.
• DO NOT attempt to open a
sealed nutribullet
®
Cup if
it feels hot or warm to the
touch. The contents may
be heated and pressurised,
causing the Cup to violently
separate when opened, and
potentially resulting in bodily
injury. See Cup Caution
(pg. 3) for details.
• Blades are sharp!
Handle with care to avoid
bodily injury. NEVER store
any exposed Rapid
Extractor Blade in the
Motor Base unattached to a
nutribullet
®
Cup.
11
1 Review all warning and
caution statements in the
Important Safeguards
section (pg. 2-6) and on
the previous page before
proceeding to Step 2.
2 Place the Motor Base on
a clean, dry, level surface
such as a counter or table.
3 Add ingredients and liquid
to the nutribullet
®
Cup.
WARNING! To avoid
leakage and over-
pressurising, do not
overfill beyond the
MAX line.
Direction #3
4 Twist the Rapid Extractor
Blade onto the nutribullet
®
Cup until it’s tightly sealed.
Direction #4
WARNING! Rapid
Extractor Blade is sharp.
Handle with care.
1413
6 Flip the Cup downward
and set it onto the
Motor Base.
Direction #6
Direction #9
5 Plug the Motor Base’s
Power Cord into an
electrical outlet.
Direction #5
7 Twist the Cup clockwise
onto the Motor Base to
lock it into place. (A “click”
signals that the Cup
is locked.)
Direction #7
8 When the Cup is locked
into place on the Motor
Base, the blending
cycle is automatically
activated and will
stop after 45 seconds.
Note: To stop the blender
before the 45-second
auto cycle is complete,
carefully twist the Cup
counterclockwise and
wait until the blades stop
before removing from
the Motor Base. To start
another blending cycle,
unlock the Cup by twisting
counterclockwise, then
follow instructions to
reattach and lock the
Cup back into place on
the Motor Base.
WARNING! DO NOT run
for more than 3 consecutive
45-second intervals to
prevent the contents
from overheating and
pressurising which may
result in severe bodily injury.
9 Twist the Cup
counterclockwise to
unlock and remove it from
the Motor Base. You will
hear a “click” when the
Cup unlocks. Enjoy!
Direction #9
WARNING! NEVER blend
hot, warm, or carbonated
ingredients or liquid in the
nutribullet
®
Cup! Such use
may over-pressurise the
nutribullet
®
Cup, causing the
Cup to separate violently
when removed from the
Motor Base or opened, which
may result in bodily injury
from the hot contents or
exposed blades.
NEVER apply heat or force, or
attempt to pry apart the Cup
from the Rapid Extractor
Blade. Doing so may crack
or shatter the Cup resulting
in severe bodily injury. Allow
the contents of the Cup to
settle down for at least 30
minutes before attempting
to open again. If still
unable to open, contact
Customer Service.
15 16
Troubleshooting.
PROBLEM:
The unit does not
power on.
SOLUTIONS:
• Make sure the Power
Cord is plugged into an
electrical outlet, and that
outlet has power.
• Make sure that the Cup/
Blade assembly is securely
attached to the Motor Base.
You will hear a ‘click’ when
they are securely attached.
PROBLEM:
After consecutive use the
blender stops working.
SOLUTIONS:
• You have exceeded 3
consecutive 45-second
blend cycles in a 5-minute
time frame. Unplug the unit
and allow it to cool down for
at least 20 minutes before
attempting to use again.
PROBLEM:
There is an odour coming from
the Motor Base when it is in use.
SOLUTIONS:
• During the first few uses of
the unit, there may be a smell
emitted from the Motor Base,
but this is normal with the
first use of the product and
should not cause alarm.
• If you notice a smell after
using the product several
times, check to ensure that
you have not exceeded the
MAX fill line on the Cup with
ingredients. Overfilled Cups
can cause strain on the motor
which can result in an odour.
Care & maintenance.
PLEASE KEEP
THESE IMPORTANT
SAFEGUARDS IN
MIND WHEN USING
THE NUTRIBULLET
®
:
• Always power o and
unplug your nutribullet
Turbo
™
Personal Blender
when not in use or when
assembling, disassembling,
changing accessories,
or cleaning.
• Always wait until the motor
comes to a complete stop
before removing the Cup
or handling the unit.
• Do not place Cups and To-Go
Lids in the microwave, they
are not microwave safe.
• Do not store an exposed
Rapid Extractor Blade on the
Motor Base without attaching
a Cup.
• NEVER place the Rapid
Extractor Blade, Cups, or
To-Go Lids on the bottom
rack or use the heat/sanitise
cycle of your dishwasher
when cleaning. It may cause
warping and possible
safety hazards.
• Do not attempt to clean the
Motor Base by immersing
in water or other cleaning
liquids. Gently wipe and dry
with a clean cloth.
• Do not place any parts or
accessories in a microwave,
conventional oven, air fryer
or stovetop pot, or immerse
in boiling water to clean or
sanitise, as this will damage
the part.
• Make sure that the Motor
Base ventilation areas are
unobstructed and clean.
• Periodically inspect your
nutribullet
Turbo
™
Personal
Blender components for
damage or wear that may
impair proper function or
present a danger or safety
hazard. Never operate your
nutribullet
Turbo
™
Personal
Blender with damaged parts
or components:
- Discontinue use if you
detect cracking, cloudiness,
warping, or damage to
the Cups.
16
18
- Discontinue use if the
Rapid Extractor Blade
does not rotate freely, or
if the gasket is missing or
damaged. Continued use
with a damaged Blade, or
use inconsistent with these
instructions may result
in bodily injury, property
damage, or damage to
your unit.
• NEVER attempt to use your
nutribullet
Turbo
™
Personal
Blender if it malfunctions or
is damaged or compromised
in any way. Immediately
contact customer service at:
AU: 1300 285 538 /
NZ: 0800 232 633.
18
• Depending on use, it is
recommend that the Rapid
Extractor Blade be replaced
at least every 12 to 18 months
unless damaged or does not
rotate freely.
• NEVER use after-market
replacement parts for your
nutribullet
Turbo
™
Personal
Blender. Aftermarket parts
are not made to nutribullet
®
specifications and may
damage your unit or cause
serious injury. Use only genuine
nutribullet
®
attachments/
accessories specifically
designed for your nutribullet
Turbo
™
Personal Blender by
calling Customer Service at:
bulletbrands.com.au /
bulletbrands.co.nz
17
EXTRACTOR BLADES:
• Rinse the Rapid
Extractor Blade with
warm, soapy water.
• Use a small brush or sponge
dampened in soapy water to
remove any residue on the
Rapid Extractor Blade.
NOTE: It’s best to clean the Rapid
Extractor Blade immediately after
use to avoid the buildup of residue.
MOTOR BASE:
• Use a sponge or dishcloth
dampened with soapy water
to clean the surface of the
Motor Base.
• Use a small brush to scrub
the actuator system of the
Motor Base.
CUPS & TO-GO LIDS:
• Cups and To-Go Lids are
top rack dishwasher-safe.
Rinse or scrub beforehand to
remove any debris.
WARNING! NEVER place
the Rapid Extractor Blade,
Cups or To-Go Lids on the
bottom rack or use the
heat/sanitise cycle of your
dishwasher when cleaning,
as this may cause warping
and possible safety hazards.
1 Once blending is complete,
make sure your Motor Base is
powered o and unplugged
from its outlet.
2 Detach the nutribullet
®
Cup
and Rapid Extractor Blade
from the Motor Base.
3 Clean the individual
components as follows:
Cleaning: #1
2019
For replacement
parts.
Visit bulletbrands.com.au /
bulletbrands.co.nz
or call customer service at:
AU: 1300 285 538 /
NZ: 0800 232 633.
STUCK INGREDIENTS:
• For stuck ingredients on
Cups or Rapid Extractor
Blades, fill with room
temperature water to the
MAX line and add 1-2 drops
of dish soap.
• Twist on the Rapid Extractor
Blade and blend for 20-30
seconds to loosen debris
enough to scrub away with
soap and water.
STORAGE:
• Always store your nutribullet
Turbo
™
Personal Blender
upright without any objects
placed on top of it. Store
accessories in a safe place
until use.
one (1) year limited
replacement warranty
statement.
If your product becomes
defective due to faulty
material or workmanship
within a period of 1
year from the date of
purchase, we warrant
to do the following:
• For New Zealand Consumers:
We will replace the product
with a new product, free of
charge, or repair the product
at our cost, at our discretion.
• For Australian Consumers:
Our goods come with
guarantees that cannot be
excluded under the Australian
Consumer Law. You are
entitled to a replacement or
refund for a major failure and
for compensation for any other
reasonably foreseeable loss or
damage. You are also entitled
to have the goods repaired or
replaced if the goods fail to be
of acceptable quality and the
failure does not amount to a
major failure.
YOUR WARRANTY
IS SUBJECT TO THE
FOLLOWING CONDITIONS:
• DO NOT operate the
appliance with a damaged
plug or cord, or if the unit has
been dropped, damaged or
dropped in water. To avoid
the risk of electric shock, do
not disassemble or attempt
to repair the appliance
on your own. If the supply
cord is damaged, it must
be replaced by a qualified
electrician in order to avoid
a hazard. Incorrect re-
assembly or repair can
cause a risk of electric shock
or injury to persons when the
appliance is used.
• The item has not been
misused, abused, neglected,
altered, modified or repaired
by anyone.
• The item has been subjected
to fair wear and tear.
• The item has not been used
for trade, professional or
hire purposes.
2221
• The item has not sustained
damage through foreign
objects, substances or
accident.
YOUR WARRANTY
DOES NOT COVER:
• Components that are
subject to natural wear
and tear caused by
normal use in accordance
with operating instructions.
• Unauthorised/improper
maintenance/handling or
overload is excluded from
this warranty.
• For guarantee claims, you
will need to submit a proof
of purchase in the form of
a valid receipt that displays
date and place of purchase.
This warranty does not replace
but is in addition to your
statutory rights.
This warranty does not apply
to accessories supplied with
the item.
This warranty applies only to
the original purchaser and
may not be transferred.
Replacement items will
be covered by the limited
warranty for the balance of
the warranty period from the
date of the original purchase.
PLEASE NOTE:
Only the defective product
or parts returned to place of
purchase will be replaced
under this warranty.
NEW ZEALAND
PO Box 100-707
NSMC
Auckland 0745
0800 232633
bulletbrands.co.nz
AUSTRALIA
PO Box 574
South Morang
Victoria 3752
1300 285538
bulletbrands.com.au
nutribullet
®
is a registered trademark of CapBran Holdings, LLC.
Copyright © 2025 CapBran Holdings, LLC. All rights reserved.
Los Angeles, CA 90024, USA. Made in China.
MODEL: NB-400
RATING: AC 220-240V 50-60Hz 1000W
Capital Brands Distribution, LLC | bulletbrands.com.au / bulletbrands.co.nz
All rights reserved.
nutribullet
®
and the nutribullet
®
logo are trademarks of CapBran Holdings, LLC
registered in the U.S.A. and worldwide.
Illustrations may dier from the actual product. We are constantly striving
to improve our products, therefore the specifications contained herein are
subject to change without notice.
NBT07400_250603
