At a Glance
Power Button Play/Pause Button
Power & Bluetooth LED Volume Up Button
Bluetooth Button USB-C Charging Port
Volume Down Button
Charging Your Speaker
• Use a certified A-C cable and charger to prevent any damage.
Flashing Red Low Battery
Steady Red Being Charged
Steady White Fully Charged
Powering On / Off
Press or Press and Hold for 2 Seconds
Power On
Flashing White to Flashing Blue
Press and Hold for 2 Seconds
Power Off
Light Off
This speaker will power off automatically after 20 minutes if no device is connected.
Using Your Speaker
Bluetooth Mode
Press the Bluetooth button to enter Bluetooth pairing mode, then select "soundcore Select 4 Go" from the
Bluetooth list to connect.
Select 4 Go
PAIRING
CONNECTED
Press Enter Bluetooth Pairing Mode
Flashing Blue Bluetooth Pairing
Steady Blue Bluetooth Connected
• If the speaker is not connected to a device within 3 minutes after being powered on, it will automatically exit
Bluetooth pairing mode.
• To re-enter Bluetooth pairing mode, press the Bluetooth button once.
• This speaker can only play music on one mobile device at a time. If another connected device starts playing
music, the speaker will automatically take over and interrupt the current playback without requiring the first
device to pause.
• Each time you power on your speaker, it will automatically connect to your last connected device if available
within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.
True Wireless Stereo (TWS) Mode
Two identical soundcore speakers can pair with each other for stereo sound. Both speakers can play the same audio
(one as the left channel and the other as the right channel).
With one speaker connected to a smartphone, press and hold the Bluetooth button for 2 seconds on two speakers to
enter TWS pairing mode.
1
PAIRING
CONNECTED
PAIRING
CONNECTED
2
>2s
3
>2s
Press and Hold for 2 Seconds Enter TWS Pairing Mode
Flashing White TWS Pairing
Steady Blue (The Speaker Connected to Smartphone)
TWS Connected
Steady White (The Other Speaker)
Button Controls
Press or Press and Hold for 2 Seconds
Power On
Press and Hold for 2 Seconds Power Off
Press Play / Pause
Press Twice Next Track
Press Three Times Previous Track
Press
Enter Bluetooth Pairing Mode
Press and Hold for 2 Seconds Enter / Exit TWS Pairing Mode
Press Volume Up / Down
soundcore App
Download the soundcore app to enhance your experience.
soundcore
Apple and the Apple logo are trademarks of
Apple Inc.
Google Play and the Google Play
logo are
trademarks of Google Inc.
Product information: Check the product name and software version, or read the user manual.
Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker
with the app.
Battery status: Indicates the remaining battery level of your speaker.
Volume control: Adjust the volume level via the app without pressing the buttons on the speaker.
EQ settings: There are various preset EQ settings you can choose from in the app to optimize your experience
while enjoying different music genres.
• soundcore Signature: Standard EQ mode optimized for well-balanced sound.
• Balanced: No enhancement for high-frequency and low-frequency sounds.
• Treble Boost: High frequencies are enhanced.
• Bass Boost: Enhances low frequencies for a deeper, richer bass experience.
Set Auto-power off time: The speaker will automatically power off when time is up.
Voice prompt: Mute or restore the voice prompt while powering on/off.
Reset
Press and hold the Bluetooth button and volume up button simultaneously for at least 8 seconds to reset the
speaker.
Specifications
Specifications are subject to change without notice.
Power Input 5V
⎓
1.5A
Battery Capacity 2400mAh/3.65V
Audio Output Power 5W
Speaker Driver 1.75 Full Range
Charging Time 4H
Playtime (varies by volume level and music content) Up to 20H
Waterproof Level IP67
Bluetooth Version 5.4
Bluetooth Range 30m / 98 ft
Hereby, Anker Innovations Limited declares that this device is in compliance with The Product Security and
Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023.
For the Statement of Compliance, visit the website:
https://uk.soundcore.com/pages/psti-related.
Note: The 'x' of SN Code: xxxxxxxxxxxxxxxx is a variable, see below table.
Variable 'x' Range of variable Content
Seventh 0-9 or A-F
Denotes the hardware version which is not effected on the safety
compliance.
Eighth 8,9,A,B,C...
Denotes the year, 8 means 2018, 9 means 2019, A means 2020, B
means 2021, C means 2022, and so on.
Ninth and tenth 01,02,03...
Denotes weeks, 01 means the first week in this year, 02 means
the secondary week in this year, and so on.
Eleventh 1-7
Denotes date, 1 means Monday, 2 means Tuesday..., 7 means
Sunday and so on.
The last five 00001-99999 Denotes serial No.
