
JBL PARTYBOX 130
OWNER’S MANUAL

22
IMPORTANT SAFETY INSTRUCTIONS
For all products:
1. Clean only with a dry cloth.
2. Do not block any ventilation openings. Install this apparatus
in accordance with the manufacturer’s instructions.
3. Do not install this apparatus near any heat sources such as
radiators, heat registers, stoves or other apparatus (including
ampliers) that produce heat.
4. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider
than the other. A grounding-type plug has two blades and
a third grounding prong. The wide blade or the third prong
is provided for your safety. If the provided plug does not t
into your outlet, consult an electrician for replacement of the
obsolete outlet.
5. Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles and the point
where they exit from the apparatus.
6. Use only attachments/accessories specied by the manufacturer.
7. Use only with the cart, stand, tripod, bracket or
table specied by the manufacturer or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
8. Unplug this apparatus during lightning storms or when unused
for long periods of time.
9. Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as when the power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, or
the apparatus has been exposed to rain or moisture, does not
operate normally or has been dropped.
10. To disconnect this apparatus from the AC mains completely,
disconnect the power- supply cord plug from the AC receptacle.
11. The mains plug of the power-supply cord shall remain readily
operable.
12. This apparatus is intended to be used only with the power
supply and/or charging cable provided by the manufacturer.
The following instructions may not apply to waterproof
devices. Refer to your device user manual or quick start
guide for more waterproof instruction if any.
• Do not use this apparatus near water.
• Do not expose this apparatus to dripping or splashing, and
ensure that no objects lled with liquids, such as vases, are
placed on the apparatus.
WARNING:
– TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
THIS SYMBOL ON THE PRODUCT MEANS THERE IS UNINSULATED,
DANGEROUS VOLTAGE WITHIN THE PRODUCT ENCLOSURE THAT
MAY PRESENT A RISK OF ELECTRICAL SHOCK.
THIS SYMBOL ON THE PRODUCT MEANS THERE ARE IMPORTANT
OPERATING AND MAINTENANCE INSTRUCTIONS IN THIS GUIDE.
CAUTION FCC AND IC STATEMENT FOR USERS
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
CAN ICES(B)/NMB(B)
FCC SDOC SUPPLIER’S DECLARATION OF
CONFORMITY
HARMAN International hereby declares that this equipment is in
compliance with the FCC Part 15 Subpart B.
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Caution:
– Changes or modications not expressly approved by HARMAN
could void the user’s authority to operate the equipment.
For Products That Transmit RF Energy:
(i) This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including
interference that may cause undesired operation of the device.

33
www.jbl.com
English
(ii) Radiation Exposure statement
This equipment complies with FCC and IC RSS-102 radiation
exposure limits set forth for an uncontrolled environment.
For radio equipment operating in 5150-5850MHz
FCC and IC Caution:
High power radars are allocated as primary users of the 5.25 to
5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations
can cause interference with and/or damage to LE LAN (Licence-
Exempt Local Area Network) devices. No conguration controls
are provided for this wireless equipment allowing any change in
the frequency of operations outside the FCC grant of authorization
for US operation according to Part 15.407 of the FCC rules.
IC Caution:
User should also be advised that:
1. The device for operation in the band 5150 - 5250 MHz is only
for indoor use to reduce the potential for harmful interference
to co-channel mobile satellite systems;
2. The maximum antenna gain permitted for devices in the bands
5250 - 5350 MHz and 5470 - 5725 MHz shall comply with the
e.i.r.p. limit: and
3. The maximum antenna gain permitted for devices in the
band 5725 - 5825 MHz shall comply with the e.i.r.p. limits
specied for point-to-point and non point-to-point operation
as appropriate.
Use Restriction Attention in European Union, operation is limited
to indoor use within the band 5150-5350 MHz.
Correct disposal of this product (Waste Electrical & Electronic
Equipment)
This symbol means the product must not be discarded as
household waste, and should be delivered to an appropriate
collection facility for recycling. Proper disposal and recycling helps
protect natural resources, human health and the environment.
For more information on disposal and recycling of this product,
contact your local municipality, disposal service, or the shop
where you bought this product.
This product is RoHS compliant.
This product is in compliance with Directive 2011/65/EU and UK
The Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Regulations 2012, and its
amendments, on the restriction of the use of certain hazardous
substances in electrical and electronic equipment.
REACH
REACH (Regulation No 1907/2006) addresses the production
and use of chemical substances and their potential impacts
on human health and the environment. Article 33(1) of REACH
Regulation requires suppliers to inform the recipients if an
article contains more than 0.1 % (per weight per article) of any
substance(s) on the Substances of Very High Concern (SVHC)
Candidate List (‘REACH candidate list’). This product may contain
the substance “lead”(CAS-No. 7439-92-1) in a concentration of
more than 0.1% per weight.
At the time of release of this product, except for the lead
substance, no other substances of REACH candidate list are
contained in a concentration of more than 0.1% per weight in
this product.
Note:
– On June 27, 2018, lead was added to the REACH candidate list.
The inclusion of lead in the REACH candidate list does not mean
that lead-containing materials pose an immediate risk or results in a
restriction of permissibility of its use.
For devices with headphone jacks
WARNINGS/CAUTIONS
Do NOT use the headphones at a high volume for any
extended period.
- To avoid hearing damage, use your headphones at
a comfortable, moderate volume level.
- Turn the volume down on your device before placing
the headphones on your ears, then turn the volume
up gradually until you reach a comfortable listening
level.
For Products That Include Batteries
Instructions for Users on Removal, Recycling and Disposal
of Used Batteries
To remove the batteries from your equipment or remote control,
reverse the procedure described in the owner’s manual for
inserting batteries. For products with a built-in battery that lasts
for the lifetime of the product, removal may not be possible for
the user. In this case, recycling or recovery centers handle the
dismantling of the product and the removal of the battery. If, for
any reason, it becomes necessary to replace such a battery, this
procedure must be performed by authorized service centers. In
the European Union and other locations, it is illegal to dispose
of any battery with household trash. All batteries must be
disposed of in an environmentally sound manner. Contact your
local waste-management ofcials for information regarding the
environmentally sound collection, recycling and disposal of used
batteries.
WARNING:
– Danger of explosion if battery is incorrectly replaced. To reduce risk of
re, explosion or leakage of ammable liquid/gas, don’t disassemble,
crush, puncture, short external contacts, expose to temperature
above 60°C (140°F), sunshine or like, expose to extremely low air
pressure or dispose of in re or water. Replace only with specied
batteries. The symbol indicating ‘separate collection’ for all batteries
and accumulators shall be the crossed-out wheeled bin shown
below:

44
Precautions
Stand Mounting Safety Precautions
Always follow instruction and precaution advice from
speaker stand manufacturer.
This speaker contains a mounting hole that allows it to be
mounted on the 35 mm pole of tripod stands or on a 35 mm
pole over subwoofers. When using stands or poles, be sure to
observe the following precautions:
• Check the stand or pole specication to be certain the device
is designed to support the weight of the speaker. Observe all
safety precautions specied by the manufacturer.
• Always verify that the stand (or subwoofer/pole) is placed on
a at, level and stable surface and be sure to fully extend the
legs of tripod type stands. Position the stand so that the legs
do not present a trip hazard.
• Use this oor stand only on a at, solid surface. Once the
support (extended leg) has been placed and adjusted,
carefully tighten the screws and use the safety pin. After
placing the speaker on the stand, check for stability: When
tilting each direction to 10 degrees (for the surface), the
speaker should not turn off. If necessary, reduce the height
of the speakers and extend the base of the stand.
• Route cables so that performers, production crew, and
audience will not trip and topple the speakers over.
• Inspect the stand (or pole and associated hardware) before
each use and do not use equipment with worn, damaged or
missing parts.
• Do not attempt to place more than one PARTYBOX series
speaker on a stand or pole.
• Always be cautious in windy, outdoor conditions. It may
be necessary to place additional weight (i.e. sandbags) on
the base of the stand to improve stability. Avoid attaching
banners or similar items to any part of a speaker system.
Such attachments could act as a sail and topple the system.
• Unless you are condent that you can handle the weight of
the speaker, ask another person to help you get it onto the
tripod stand or pole.
WARNING - For Products That Contain Coin/
Button Cell Batteries
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD. This
product contains a coin/button cell battery. If the coin/button cell
battery is swallowed, it can cause severe internal burns in just
2 hours and can lead to death. Keep new and used batteries
away from children. If the battery compartment does not close
securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside
any part of the body, seek immediate medical attention.
For All Products with Wireless Operation:
HARMAN International hereby declares that this equipment
is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU and UK Radio
Equipment Regulations 2017. The declaration of conformity may
be consulted in the specs section of the product detail page,
accessible from www.jbl.com or in www.jbl.com/doc.
EPILEPSY WARNING
A few people may experience epileptic
seizures when viewing ashing lights.

55
www.jbl.com
English
8. POLE-MOUNTING YOUR PARTYBOX 14
9. ADVANCED USAGE 15
9.1 JBL ONE app 15
9.2 Light effect 15
9.3 Multi-speaker connection 15
9.4 Daisy chain 15
9.5 Factory reset 16
9.6 IPX4 16
10. SPECIFICATIONS 16
11. TROUBLESHOOTING 17
12. COMPLIANCE 17
13. TRADEMARK 18
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS 2
1. INTRODUCTION 6
2. WHAT’S IN THE BOX 6
3. PRODUCT OVERVIEW 7
3.1 Top panel 7
3.2 Back panel 8
4. PLACEMENT 8
5. POWER ON 9
6. USING YOUR PARTYBOX 9
6.1 Bluetooth connection 9
6.2 TV connection 10
6.3 USB connection 10
6.4 Music control 11
6.5 AUX connection 11
6.6 Mixing sound with a microphone and/or guitar 11
6.7 Charge your mobile device 13
6.8 Replace battery (JBL BATTERY 200) 13
7. CARRYING YOUR PARTYBOX 14

66
2. WHAT’S IN THE BOX
1 2 3
*
*
*
1) Main unit*
2) Power cord**
3) Product information
* Charge the speaker before rst use.
** Power cord quantity and plug type vary by regions.
1. INTRODUCTION
Congratulations on your purchase! This manual includes
information about the JBL PARTYBOX 130 speaker. We
encourage you to take a few minutes to read this manual, which
describes the product and includes step-by-step instructions to
help you to set up and get started. Read and understand all the
safety instructions before using your product.
If you have any questions about this product, its installation or
operation, please contact your retailer or customer service, or
visit us at www.jbl.com.

77
www.jbl.com
English
3. PRODUCT OVERVIEW
3.1 Top panel
1
1
1
2
4
5
39
7
6
8
1
1) LED ring indicator
Battery level
≤15%
Charging / Battery
level >15%
Fully charged
2)
• Press to cycle through the menu options: -> ->
-> -> (The and options will be skipped if no
microphone or guitar is connected.)
3)
• Select a bass level: Off (default), level 1 or level 2.
4)
• Turn the power on or off.
5) Top edge lighting
6) Handle
7) Control knob
• Press once to play or pause playback.
• Press twice to skip to the next track.
• Press three times to skip to the previous track.
• Rotate clockwise / counterclockwise to increase or
decrease the main volume.
(when a microphone is connected)
• Press once to play or pause playback.
• Press twice to skip to the next track.
• Press three times to skip to the previous track.
• Rotate to adjust the volume of the microphone.
(when a guitar is connected)
• Press once to play or pause playback.
• Press twice to skip to the next track.
• Press three times to skip to the previous track.
• Rotate to adjust the volume of the guitar.
• Press to turn light effect on or off.
• Rotate to switch between different light patterns or turn
the light effect off.
• Hold for more than 2 seconds to turn strobe light on or
off.
• Indicate battery level / charging / other system status.
Power-off mode
Off Not charging
Solid white Charging
When unselected (Power-on mode):
Flashing red
quickly
Battery level ≤15%
Off
Charging /
Battery level >15%
Flashing white
Power connected /
USB / AUX / Daisy
Chain / Charge Out
mode
When selected (Power-on mode):
Solid white
Charging /
Any battery level
Caution:
– Do not look directly at the light-emitting parts when the speaker
lights are turned on.
8)
• Press to enter Bluetooth pairing mode.
9)
• Press to enable or disable multi-speaker connection via
Auracast.
LED behavior
Solid white Power on
Dim white Standby
Off Power off
Flashing white quickly Pairing
Solid white Connected
Off Not connected
Solid white Level 2
Dim white Level 1
Off Off
Solid white
Multi-speaker
connection enabled
Off
Multi-speaker
connection disabled

88
3.2 Back panel
10
8
9
11
6
7
2
3
1
4
5
1) IN/OUT
• Daisy-chain multiple PARTYBOX speakers through
3.5 mm audio cables (not supplied).
2)
• Connect to a microphone or guitar.
3) Microphone 2/guitar slider switch
4) AUX IN
• Connect to an external audio device through a 3.5 mm
audio cable (not supplied).
5) USB-C
• Connect to a USB storage device.
• Connect to your PC, tablet, or other mobile devices.
• Charge your mobile devices.
Note:
– Choose the USB-C port working mode in the JBL ONE app
(see "9.1.1 USB-C Port Working Mode").
6)
• Connect to a microphone.
7) OPTICAL
• Connect to a TV through an optical cable (not supplied).
8) Battery compartment
• Pull down the latch to open the battery compartment.
9) Mounting hole for the JBL microphone holder
10) AC power socket
• Connect to AC power supply.
11) Pole-mounting your PARTYBOX
4. PLACEMENT
Caution:
– Do not sit or lean on the speaker, or push it sideways, to avoid
tipping over and possible damage.
Place the speaker on a at, stable surface and ensure that the
rubber feet side is down.

99
www.jbl.com
English
5. POWER ON
Cautions:
– Use the provided power cord only.
– You can use either AC power or the built-in battery as the power
supply for the speaker.
1
2
OFF
ON
1. Connect AC power.
• To use the built-in battery, disconnect the AC power after
charging the speaker.
2. Press to power on.
Tips:
– Fully charge the speaker before rst-time use to prolong the
lifespan of the built-in battery.
– If powered by the battery, the speaker will turn off automatically
after 20 minutes of inactivity.
– If powered by AC, the speaker will switch to standby mode
automatically after 20 minutes of inactivity. Press on the speaker
to return to normal operation.
6. USING YOUR PARTYBOX
Notes:
– Only one sound source can be played at a time.
– Starting playback from another source will always interrupt the
current source.
6.1 Bluetooth connection
You can use the speaker with your Bluetooth-enabled
smartphone, tablet, or other devices.
ON
2
1
<10 m (33 ft)
Settings Bluetooth
Bluetooth
DEVICES
JBL PartyBox 130
Now Discoverable
Connected
1. Press on the speaker to enter Bluetooth pairing mode.
2. Choose JBL PartyBox 130 on your Bluetooth device to
connect.
3. Once successfully connected, you can stream audio from
your Bluetooth device to this speaker.
Notes:
– This speaker supports multi-point connection. You can pair a
second Bluetooth device without disconnecting the rst one.
– Enter “0000” if a PIN code is requested for connection to a
Bluetooth device.
– Bluetooth performance can be affected by the distance between
this product and your Bluetooth device and the environment of
operation.
To terminate the Bluetooth-enabled device:
• Turn off this speaker, or
• Disable Bluetooth on your device.

1010
To reconnect the Bluetooth-enabled device:
• When you turn on this speaker next time, it tries to
reconnect the last connected device automatically.
• If not, manually select JBL PartyBox 130 on your Bluetooth
device to connect.
6.2 TV connection
1 2
PCM *
OPTICAL
OPTICAL
OUT
1. Connect the speaker with your TV by using an optical cable
(not included).
2. On your TV, specify “Pulse Code Modulation (PCM)” as the
digital audio output method.
Note:
– For TV operations, refer to the user manual instructions supplied
with your TV.
6.3 USB connection
For a PC, tablet, or other mobile device:
1. Choose the "UAC Music Streaming & Recording" mode in
the JBL ONE app (see "9.1.1 USB-C Port Working Mode").
2. Connect the speaker to a PC, tablet, or other mobile device
for audio playback and recording (microphone and guitar
inputs only).
For a USB storage device:
1. Choose the "USB Drive Playback & Charging Out" mode
in the JBL ONE app (see "9.1.1 USB-C Port Working Mode").
2. Connect a USB storage device containing audio les to the
USB-C port (not available for the EMEA region).
Supported audio formats
Extension
Sample
rate
Bitrate
MP3 44.1 / 48
32/40/48/56/64/80/96/112/128/
160 (kbps)
WAV 44.1 / 48
128/352.8/384/705.6/768/1411/
1536 (kbps)

1111
www.jbl.com
English
Extension
Sample
rate
Bitrate
FLAC 44.1 / 48
132/163/168/183/271/308/351/402/
463
508/514/614/628/661/654/678/694/
695
711/737/741/747/751/752/766/768/
770/778/781/786/787/789/791/813/
817/839/845/853/856/859/866/867/
882/885/886/887/890/900/910/911/
912/915/916/917/920/921/928/929/
936/937/941/944/951/969/970/981/
986/990/992/997/999/1001/1005/
1012/1015/1017/1019/1020/1021/
1033/1034/1036/1040/1041/1048/
1053/1057/1085/1123 (kbps)
6.3.1 Recording audio to a USB storage device
1. Choose the "USB Drive Recording" mode in the JBL ONE
app (see "9.1.1 USB-C Port Working Mode").
2. Hold and simultaneously for more than 2 seconds
(microphone and guitar inputs only).
→ When recording starts, the LED on the button ashes
white once.
3. Repeat step 2 to stop recording.
→ The LED on the button ashes white twice.
6.4 Music control
Note:
– When the / icon is displayed, the knob cannot be used to
control music playback.
x 1
x 2
x 3
• Press the knob once to pause or resume playback.
• Press the knob twice to skip to the next track.
• Press the knob three times to skip to the previous track.
• Rotate the knob clockwise or counterclockwise to increase
or decrease the main volume.
• Press to select a bass level: level 1, level 2, or off.
Tip:
– The skip operation is unavailable in AUX mode.
6.5 AUX connection
1. Connect an external audio device to the speaker through a
3.5 mm audio cable (not supplied).
→ The speaker switches to the AUX source automatically.
2. Start audio playback on the external device.
6.6 Mixing sound with a microphone
and/or guitar
By using a microphone or electric guitar, you can mix sound with
an audio source.
Notes:
– Always set the volume of the guitar or microphone to the minimum
level before connection / disconnection.
– Always disconnect the guitar or microphone when you are not
using them.

1212
6.6.1 Connecting a microphone
For a wired microphone:
1
2
1. Connect the microphone to the or socket.
2. When connecting a microphone to the speaker, switch
the slider to show .
For JBL EasySing wireless microphones:
The speaker supports the following wireless microphones:
• JBL EasySing Mics
• JBL EasySing Mic Mini
Follow the wireless microphone’s Quick Start Guide (QSG) to
connect it to the speaker.
Tip:
– The USB-C port is set to "JBL EasySing Mics" mode by default. If
needed, choose this mode in the JBL ONE app (see "9.1.1 USB-C
Port Working Mode")
To position the microphone
1. Attach the JBL microphone holder (sold separately) to the
speaker, as illustrated.
2. Gently place the microphone into the holder. Ensure it is
secured with the JBL microphone holder strap.
Note:
• The JBL microphone holder is incompatible with JBL EasySing Mic
Mini.
6.6.2 Connecting a guitar
1
2
1. Connect a guitar to the socket.
2. Switch the slider to show .
6.6.3 Mixing sound
Sing through the microphone or play the guitar.
To adjust the volume of the audio source:
• When the icon is displayed, rotate the knob on the top
panel.

1313
www.jbl.com
English
1
2
To adjust the microphone volume:
• Press until the icon is displayed, then rotate the
control knob.
1
2
To adjust the guitar volume:
• Press until the icon is displayed, then rotate the
control knob.
6.7 Charge your mobile device
Caution:
– Do not connect the speaker until the USB-C port is completely dry
and clean.
Notes:
– Choose the "USB Drive Playback & Charging Out" mode in the
JBL ONE app to start charging (see "9.1.1 USB-C Port Working
Mode").
– The USB charging cable is not supplied.
6.8 Replace battery (JBL BATTERY 200)
1. Pull down the latch to open the battery compartment, and
then remove the old battery.
2. Insert a new battery of the same type (JBL BATTERY 200)
with the metal contacts facing down, and then close the
battery cover.
Note:
– Charge the battery before rst use.

1414
8. POLE-MOUNTING YOUR
PARTYBOX
Cautions:
– Installation must be performed by qualied personnel using safe
rigging standards.
– The installer is responsible for selecting and using appropriate
mounting hardware to safely pole-mount the speaker.
2
35 mm
1
11.3 kg / 24.8 lbs
7. CARRYING YOUR PARTYBOX
Cautions:
– Before carrying the speaker, ensure that all the cords are
disconnected.
– To avoid personal injury and/or property damage, hold the speaker
rmly while carrying it.
The PARTYBOX 130 is designed with a handle to help you carry
the speaker easily.

1515
www.jbl.com
English
9.3 Multi-speaker connection
You can connect multiple PARTYBOX speakers to create a party
atmosphere with enhanced sound.
Press on both speakers.
To disconnect:
Power off or press on either speaker.
Tip:
– By default, the speaker connected to your Bluetooth device acts as
the primary speaker.
9.4 Daisy chain
9. ADVANCED USAGE
9.1 JBL ONE app
JBL ONE
Download and install the JBL ONE app to get more from the
product.
9.1.1 USB-C Port Working Mode
In the JBL ONE app, choose the desired USB-C port working
mode.
JBL PARTYBOX 130
9.2 Light effect
1
2
1. Press until the icon is displayed.
2. Use the control knob to control the lighting.
• Press the knob to turn the light effect on or off.
• Hold the knob for more than 2 seconds to turn strobe
light on or off.
• Rotate the knob clockwise / counterclockwise to switch
between different light patterns or turn the light effect off.

1616
9.5 Factory reset
To restore the factory settings, hold the control knob and for
more than 10 seconds.
>10s
9.6 IPX4
Cautions:
– Always keep the charging port dry before connecting AC power.
– To ensure splash resistance, always keep the protective covers
closed securely.
The speaker is IPX4 splash resistant.
10. SPECIFICATIONS
• Transducer: 2 x 1 inch (25 mm) silk dome tweeters,
2 x 5.25 inch (145 mm) woofers
• Output power: 200 W RMS (IEC60268)
• Power input: 100 – 240 V ~ 50 / 60 Hz
• Frequency response: 40 Hz - 20 kHz (-6 dB)
• Signal-to-noise ratio: > 80 dB
• Battery type: Li-ion 34 Wh (equivalent to 7.2 V / 4722 mAh)
• Battery charge time: < 3 hours (speaker off mode)
• Music play time: Up to 15 hours (varies by volume level and
audio content)
• USB charge out: 5V / 1A (Max)
• USB le format: FAT16, FAT32
• Bluetooth
®
version: 6.0
• Bluetooth
®
prole: A2DP V1.4, AVRCP V1.6
• Bluetooth
®
transmitter frequency range:
2.4 GHz - 2.4835 GHz
• Bluetooth
®
transmitter power: ≤ 18 dBm (EIRP)
• Bluetooth
®
transmitter modulation: GFSK, π/4 DQPSK,
8DPSK
• Supported audio formats: .MP3, .WAV, .FLAC
• Product dimensions (W x H x D): 298.4 x 575 x 303 mm /
11.7" x 22.6" x 11.9"
• Net weight: 11.3 kg / 24.8 lbs
• Packaging dimensions (W x H x D): 349 x 643 x 378 mm /
13.7" x 25.3" x 14.9"
• Gross weight: 14 kg / 30.9 lbs

1717
www.jbl.com
English
11. TROUBLESHOOTING
Caution:
– Never try to repair the product by yourself. If you have any
problems while using this product, check the following points
before you request service.
System
The speaker will not turn on.
• Ensure that the speaker battery is not drained. If not, use
the AC power instead.
No response from some buttons / knobs
• The product may be in demo mode. In this mode, some
buttons are disabled. With AC power connected, hold
and the control knob simultaneously for more than
10 seconds to exit.
• The top panel may be locked. In this case, all buttons /
knobs on the top panel, except , are disabled. Access the
JBL ONE app or restart the speaker to unlock it.
Sound
No sound from the speaker.
• Ensure that the speaker is powered on.
• Adjust volume.
• Ensure that a sound source is active and not muted.
Bluetooth
A device cannot connect with the speaker.
• Ensure that the Bluetooth function of the device is enabled.
• The speaker is already connected with another Bluetooth
device. Hold on the speaker for more than 10 seconds to
disconnect and pair with a new device.
Poor audio quality from a connected Bluetooth device
• The Bluetooth reception is poor. Move the device closer to
the speaker, or remove any obstacle between the device
and speaker.
12. COMPLIANCE
The product complies with Commission Regulation (EU)
2023/826 ecodesign requirements for off mode, standby mode,
and networked standby energy consumption of electrical and
electronic household and ofce equipment.
1. Information on power consumption
• Off mode: N/A
• Standby mode: ≤ 0.5 W
• Networked standby mode: ≤ 2.0 W
• Networked standby mode if all wired ports are connected
and all wireless ports are activated: ≤ 2.0 W
2. The period after which the power management function
switches the equipment automatically into:
Off/Standby
mode
When the system is
in normal operation
Switched to Off/
Standby mode after 20
minutes of inactivity
Networked
Standby
mode
When wireless
network connection
is activated
Switched to networked
Standby mode after 20
minutes of inactivity
The maximum operation temperature is 40 °C.
No naked ame sources, such as lighted candles, should be
placed on the apparatus.

1818
13. TRADEMARK
The Bluetooth
®
word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. The Auracast™ word mark and
logos are trademarks owned by the Bluetooth SIG, Inc. Any use
of such marks by HARMAN International Industries, Incorporated
is under license. Other trademarks and trade names are those of
their respective owners.

HARMAN International Industries,
Incorporated 8500 Balboa Boulevard,
Northridge, CA 91329 USA
www.jbl.com
© 2026 HARMAN International Industries, Incorporated.
All rights reserved.
JBL is a trademark of HARMAN International Industries, Incorporated, registered in
the United States and/or other countries. Features, specications and appearance are
subject to change without notice.
JBL PARTYBOX 130_OM_Global_EN_V3
