OWNER’S MANUAL
Fully Automatic
Washing Machine
Read This Manual
Read and
Keep the OWNER'S MANUAL handy for
future use .
follow the instructions carefully.
Thank you for purchasing TOSHIBA automatic
washing machine.
Model:
AW-T26D1400TM
1
CONTENTS
Levelling the washing machine ..............................................
Selection of tap ....................................................... .......................
Preparation before washing................................. ....................
Washing ................................................................. .... ......................
After washing....................................................... .... ......................
Washing matters needing attention ................ .....................
The usage of detergent and washing powder....
...............
Control pan ...........................................................
el
......................
Option............................................................... .......... ......................
Personalized setting of washing ... ......program .......... ......
Operations of washing process................ ...............................
Washing
table .............................. ...... ..course ....................... ....
MAINTENANCE
Cleaning and care .............................................. ..........................
Cleaning the cabinet............................................... .... ................
Trouble shooting.................................................. ... .................... ...
Technical ....................................... ..........specifications ...............
11
12
13
13
14
14
14
15
16
17
17
18
20
20
21
22
OPERATION
Cleaning inlet filter .................................. ....the ........................
20
19
Recommended detergent amount........................................
Lid lock open/close ....................................................................
18
Connection of inlet hose, tap and washing machine......
12
Energy efficiency test program
.................................................23
SAFETY INSTRUCTIONS
Safety instructions ...................................... .................................
INSTALLATION
Product description ............................................ ..........................
Packing the washing machine .............................. .......................
Unpacking the washing machine ..................... .....................
2
8
9
9
Installation of the cabinet base cover....................................
10
Installation area ..................................................... .......................
10
..
2
SAFETY INSTRUCTIONS
For your safety, the information in this manual must be
followed to minimize the risk of fire or explosion, electric
shock, or to prevent property damage, personal injury or
loss of life.
− Staff kitchen areas in shops, offices and other working
environments;
− Farm houses;
− By clients in hotels, motels and other residential type
environments;
− Bed and breakfast type environments;
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities or lack of experience and
knowledge unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
• The new hose-sets supplied with the appliance are to
be used and that old hose-sets should not be reused.
• The openings must not be obstructed by a carpet.
• This appliance is intended to be used in household only
and it is not intended to be used such as:
Important safety precautions
CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not
be supplied through an external switching device, such
as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
Safety instructions
SAFETY INSTRUCTIONS
3
Warning!
This combination of symbol and word
indicates a potentially dangerous situation which may
result in death or serious injuries unless it is avoided.
descriptive
Explanation of the symbols:
Caution!
This combination of symbol and word
indicates a potentially dangerous situation which may
result in slight or minor injuries or damage to property
and the environment.
descriptive
Note!
This combination of symbol and word
indicates a potentially dangerous situation which may
result in slight or minor injuries.
descriptive
Washing Capacity
Standard Water Pressure
0.03MPa~0.8MPa
13.0kg
Model
AW-T26D1400TM
4
SAFETY INSTRUCTIONS
The electric shock!
Warning!
• This washing machine is for indoor use only.
• Do not put this washing machine in a humid place.
• Before doing any maintenance the unit, unplug the
appliance from the electrical source.
• Always unplug the machine and turn off the water supply
after use. Be aware of the maximum and minimum inlet
water pressure which is in megapascals (MPa)
• To ensure your safety, power plug must be inserted into
an earthed three-pole socket. Check carefully and make
sure that your socket is properly and reliably earthed.
• Make sure that the water and electrical devices provisions
are connected by a qualified technician in accordance with
the manufacturer's instructions and local safety regulations
• If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
5
Risk of explosion!
• Do not wash or dry articles that have been cleaned in,
washed in, soaked in, or dabbed with combustible or
explosive substances( such as wax, oil, paint, gasoline,
degreasers , dry-cleaning solvents, kerosene, etc.) .
This may result in fire or explosion.
SAFETY INSTRUCTIONS
• Animals and children can not climb into the machine.
Check the machine before every operation.
• Children should be supervised that they do not play with
the appliance.
• Keep children and animals far away from the machine
during operation.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities or lack of experience and
knowledge unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
• The appliance can not be used by children and persons
with reduced physical sensory or mental capabilities or
lack of experience and knowledge if they have been
given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards
involved.
Cleaning and user maintenance shall not be done by
children without supervision.
Risk to children!
6
• This washing machine is for indoor use only.
• It is not intended for built-in using.
• The openings must not be obstructed by a carpet.
• The washing machine shall not be installed in bath rooms
or very wet rooms as well as in the rooms with explosive
or caustic gases.
• Remove all packaging materials before using the appliance.
Otherwise, serious damage may result.
• The washing machine with single inlet valve may only
be connected to a cold water supply.
• The plug must be accessible after installation.
• Avoid place where the machine is exposed to direct
sunlight .Plastic parts may become deformed or discolored .
Avoid place where the machine may become frozen
during cold weather.
• This appliance is intended to be used in household.
• The new hose-sets supplied with the appliance are to
be used and that old hose-sets should not be reused.
• Do not wash, spin, or dry water-proof seats, mats, or
clothing.
Do not wash thick, hard mats even if the washer mark
is on the care label.
This may result in injury or damage to the washer, walls,
floor, or clothing due to abnormal vibrations.
SAFETY INSTRUCTIONS
Installing the product!
Caution!
7
Operating the appliance!
• Before washing the clothes for the first time, the product
shall be operated without clothes using tub clean as the
displayed program on the control panel.
• Flammable and explosive or toxic solvents are forbidden.
Gasoline and alcohol etc. Shall not be used as detergents.
Please only select the detergents suitable for machine
washing, especially for top-loading fully automatic washing
machines.
• Make sure that all pockets are emptied. Sharp and rigid
items such as coins, brooches, nails, screws or stones etc.
may cause serious damage to this machine.
• This appliance is intended to be used in household.
• Hands should not be inserted into the rotating drum .
• This product is for domestic use only.
SAFETY INSTRUCTIONS
Risk of damaging appliance!
• Your product is only for home use and is only designed
for textiles suitable for machine washing.
• Do not climb up and sit on the glass lid of the machine.
• Cautions during Machine Handling and transport:
1.The accumulated water shall be drained out of the
machine.
2.Handle the machine carefully. Never hold protruding
parts of the machine while lifting.
3.This appliance is heavy, it should be transported carefully.
• Please do not close the glass lid with excessive force.
• It is forbidden to wash carpets.
8
INSTALLATION
Product description
• All illustrations in this manual are for reference only.
Please refer to the product ,for actual appearance of the parts.
Note!
Accessories
Inlet hose assy Manual
Screw
Cabinet base
cover
Drain hose
Adjustable foot knob
Frame
Control panel
Cabinet
Water inlet valve
Power cord and plug
Handle
Lid lock
Glass lid
Drum
Drain hose
9
INSTALLATION
• be
•
Packaging material (e.g. Films, Styrofoam) can dangerous for children.
There is a risk of suffocation ! Keep all packaging well away from
children.
materials
Warning!
Unpacking the washing machine
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Packing the washing machine
Installation area
Before installing the machine, the location characterized
as follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0 ℃
5.Keep far away from fuel sources such as coal or gas
• Stability is important to prevent the product from moving!
• Make sure that the product does not stand on the power
cord.
Warning!
10
INSTALLATION
B
w
W≥40mm
Installation of the cabinet base cover
Soft fabric
Cabinet
base cover
Running the machine or washing while placing on
the bottom foam is strictly forbidden
Lay the washing machine backward on the soft fabric .
Secure the base cover plate with screws.
B≥70mm
• Keep clearance: 40mm with the drain hose beside the
machine, 70mm without the drain hose.
9
11
The way to place the end of drain hose:
•
• Position drain hose properly otherwise
water leakage.
Do not kink protract the drain hose.
or compress
, ,
• If drain hose is too long, do not force it into washing machine as this will
cause abnormal noises.
the improper position may
result in
Warning!
Water trough
Less than 3m
Less than 15cm
• The lock nuts on all four feet must be screwed tightly against the housing.
Levelling the washing machine
Warning!
INSTALLATION
Drain direction
Left or right style
Picture
Left
Right
1. Check if the feet are properly attached to the cabinet. If not, please rotate them to their
original position and tighten the nuts.
2. Check alignment of the product with a leveler and do the succeeding steps if necessary.
3. Loosen the lock nut and rotate the foot either clockwise or counter clockwise ,until it
closely contacts with the floor.
4. Assure that the lock is secure and then alternately press the four top corners of the
machine, to check if the proper adjustment has been done.
5. It is necessary to confirm whether the machine is horizontal, hang the weight with a rope
and hang it down, and then confirm that the gap between the upper and lower parts,
that is, the difference of ab, cannot be more than one centimeter
WeightsWeights
a - b≤1cm & b - a≤1cm
Wrong
Right
Foot
Lock nut
Loosen
Lock
Raise
Lower
12
INSTALLATION
Wall
1:Connection between ordinary tap and inlet hose.
Connection of inlet hose, tap and washing machine
Clamp nut
Tap
1.Loosen clamp nut
to show 5mm groove
2.Loosen four
screws
3.Set connecting base
on tap and tighten
screws evenly
4.Tighten clamp nut
Inlet valve
Inlet hose
Slide bushing
5.Press slide bushing,
insert inlet hose into
connecting base
6.Connection finished 7.After connection and installation,
check if there is water leakage
5mm
Connect inlet hose to tap properly , depending on the type of inlet hose supplied with the
washing machine .
Washing
1013
OPERATION
Caution!
Before washing, please make sure installed properly.
Before washing first time, the washing machine shall be operated
•
•
•
that the unit is
for the
without clothes using tub clean as the recommended course.
Do not use water with temperatures over 50 °C
Preparation before washing
Note!
• Water level can be selected manually .
1 2 3 4
Open the door and
Put the clothes in the
washing machine
5
Plug in
Open tap
Add detergent Close door
Power on
Start up
1
3
Select PROGRAM
PROGRAM
2
PROGRAM
1
2
Tie tassels into Knot, fasten
zippers and buttons
• Washing a single piece of clothing may cause severe unbalance and
consequently sound an alarm. In this case, it is suggested to add one or two
more pieces of clothing to the wash load that will also make spinning smoother.
• Do not wash clothes stained with kerosene ,touching gasoline, alcohol and
other flammable materials.
• Before washing , lease check the clothes labels and the detergent usage
instructions. se low-density detergent before wash suitable for washing
machines .
p
U
Take items out
of the pockets
Put small clothes into a
laundry net
Check the label
Washing matters needing attention
Turn the following clothes
inside out those that easily
form fiber on its surface and
those with long strands of fiber
Segregate clothes with
varying textures or materials
Warning!
10
14
• Choose the suitable type of detergent for the various washing temperature to get
the best washing effect with less water and energy consumption.
• Washing powder can only be put directly into the tub if you want. As for powder
detergent that can form into clusters or masses, it is suggested to dilute the detergent
with some water before pouring into the tub.
The usage of detergent and ashing powder w
OPERATION
After washing
The buzzer will beep after washing finished and the power supply will be cut
off automatically . unload the laundry.
At this point , you may
OPERATION
10
15
Control panel
Lid lock
Lid lock refer to page 18.
3
4444
5
6
1
2
4444
PROGRAM
2
PROGRAM
1
16
OPERATION
Option
Select the water level according to clothing categories, degree of soiling
and washing habits of users
Washing time, number of rinses , spinning time can be selected.
Only for having these . models functions
WATER LEVEL
WASH /RINSE /SPIN
Start
GREAT WAVES is able to shorten wash time by special rhythm and water
flow. The GREAT WAVES are only available HEAVY WASH, REGULAR,
SOAK and BLANKET.
On
Set PROGRAM
Choose the
GREATWAVES
The is lit
On
CHILD PROOF
To avoid mis operation by children.
Start
To activate press
the two buttons at the same time
CHILD PROOF
•
• The “ CHILD PROOF” will lock all buttons except [ On/Off ] and [ CHILD PROOF] .
If this mode is set to ON and the lid opened during operation, the buzzer beeps ,
the indicator flashes , the washer stops water supply and stops wash/spin operation,
and drains water from wash tub approximately 5 seconds of the lid opening.
Caution!
AROMA+
This is an additional function to increase fragrance of clothing when you
select it.
Caution!
If there is any interruption in the power supply while the machine is operating,
a special memory stores the selected program and recalls the memory setting
when the power is restarted.
DELAY END
1. Select a PROGRAM.
3. Press to commence the Delay end operation.
Choose the PROGRAM
StartOn
Setting delay end time
Press the [DELAY END] button repeatedly , to see Preset time choices ,the
Preset time should be set before starting the course. If you want to set the
Preset time, after the course has already started, the on/off button should be
pressed to reset the course.
2. Press the DELAY END button to choose the time.
The is lit
PROGRAM
2
PROGRAM
1
PROGRAM
2
PROGRAM
1
17
OPERATION
Set program
Personalized setting of washing program
Customers can select washing program according to actual demand.
Operations of washing process
Start
On
Spin only
Wash only
Set washing time Set rinse times Set timespin
Set water level
Set program
On
Set washing time
Set rinse times
“light off”
Set timespin
Start
Set program
On
Set washing time
” light off"
Set rinse times
” light off"
Set timespin
Start
Wash Spin+Rinse+
Set program
On
Set washing time Set rinse times Set timespin
Start
Other process combinations are similarly set, as the above examples.
Note!
You can choose the following parameters : minutes WASH:0,9,12,15,18
minutes RINSE:0-4times SPIN:0,3,5,7,9minutes.
The user can set a single process or combinations of washing, rinsing and
spinning freely according to the need. Detailed operations are as follows
for different models:
“light off”
On
Start
Set SPIN
On
Start
Set SPIN ONLY program
Method 1
Method 2
Method 3: SPIN ONLY and TUB CLEAN program not applicable
PROGRAM
2
PROGRAM
2
PROGRAM
1
PROGRAM
2
PROGRAM
1
PROGRAM
2
PROGRAM
1
PROGRAM
2
PROGRAM
1
18
Washing tablecourse
OPERATION
Course
REGULAR:
Standard fabric washing program, suitable to wash cotton fabric.
Washing is done once, twice for rinsing and the spin time is a bit long.
QUICK:
Suitable to wash lightly- stained clothes and clothes for summer.
SPIN ONLY:
SOAK:
Select this program if clothes need to be soaked before washing.
HEAVY WASH:
BLANKET :
Courses are available according to the laundry type.
Only for having these models functions:
Heavily-stained/thick clothes.
The wash time is longer, the water action stronger, so the
washing effect is better.
COLORALIVE:
Mid/High/Low water level selection, the tempo is soft, slow
washing and spinning speed, for minimal wear and deformation.
With intermittent spinning the dirt on the inner & outer surfaces
of the drum, as well as the pulsafor are removed.
TUB CLEAN:
Select this program to Spin and drain only .
Lid lock open/close
During operation , when lid lock light is on and glass lid cannot be opened.
During operation , if unpluged or blackout happens, glass lid cannot be
opened.
To open glass lid during operation , press Start/Hold . And then lid lock
light is off and glass lid can be opened.
Lid lock is not unlocked immidiately if you press Start/Hold. it is unlocked
after it completely stops.
If lid lock does not work properly, please stop the operation and contact
the after-sales service.
Note!
OPERATION
10
19
Recommended detergent amount
Rated capacity(kg)
Manual Water
Level Setting
Detergents
Softener
Powder Liquid Normal
type
Concentrated
type
13kg
6kg
3kg
1.5kg
90L
74L
58L
38L
Approx.
14g
Blanket
Approx.
13mL
Approx. 50mL
Approx. 75mL
Approx.
23mL
Approx.
23m -43mLL
Approx.
12mL
Approx.
12 -17mLmL
Approx. 25mL
Note!
This is just for reference.
Only 1 gear water level can be selected manually.
(1gear)
(2gear)
(3gear)
(4gear)
10kg
Approx.
13m -24mLL
Approx.
14 -40gg
Approx.
40 -65gg
Approx.
65 -100gg
Approx.
24m -41mLL
Approx.
41m -60mLL
Approx.
43m -65mLL
Approx.
65m -92mLL
Approx.
13 -21mLmL
Approx.
19 -31mLmL
The following conditions may cause laundry
powder residue in the drawer, Please clean
the drawer regularly.
Excessive addition of laundry powder;
Extremely low water pressure.
SOFTENER
POWDER
DETERGENT
Caution!
10
20
• Before your maintenance starts, please unplug the machine and close the tap.
Cleaning the cabinet
Proper maintenance of the washing machine can extend its
working life. The surface can be cleaned with diluted
non-abrasive neutral detergents when necessary. If there is
any water overflow, use a dry cloth to wipe it off immediately.
No sharp items are allowed.
Formic acid and its diluted solvents or equivalent are forbidden, such as
solvents or chemical products ,etc.
•
alcohol,
Warning!
Note!
Cleaning and care
Cleaning the inlet filter
• Inlet filter must be cleaned if pressure of water from the inlet drops.
Washing the filter in the washing machine:
1.Screw off the inlet pipe from the back of the
machine.
2.Pull out the filter with a pair of long nose
pliers and reinstall it back after being
washed.
3.Use a brush to clean the filter.
4.Reconnect the inlet hose.
Note!
1.There is a built-in lint filter in your washer. It
can help to collect lint during washing cycle.
2.It is suggested to clean the lint filter every
10 cycles.
3.Take it out and clean the filter with water.
Then place it back into the washer.
Lint filter cleaning
MAINTENANCE
Washing the filter in the water inlet hose
1. Close the tap.
2. Remove water inlet hose
from the tap.
or water filter
3. and clean the filter.Disassembly
4. Reconnect the water inlet hose.
10
21
Trouble shooting
• After the checking, try to use the appliance again ,If problems persist or the
display shows other alarm code again, contact the service center.
• Press "Start/Hold" to cancel error code display.
Note!
Description
Description
Reason
Solution
No washing
Inspection Items
If the power is off .
If the water volume reache the required water level.(The washer will
not work if the water amount does not reach the required water level)
If it is set to "Preset" washing mode. (It will only start to work until the
reservation time is reached)
No water flows in
If the power is off or the fuse is burned out.
If the water supply is cut off or the water pressure is too low.
If the inlet hose is properly connected and the water tap is opened.
If the filtering screen of inlet valve is blocked by dirt.
If the "Start / Hold" button is pressed after the power switch is pressed.
Abnormal draining
If the end of the water drain hose is placed very high.
If the end of water drain hose is immersed in and blocked by a pool of water.
Abnormal spin
If the top lid is closed.
If most of the clothing are at one side of the drum or if too many
clothes are loaded in the machine.
If the washer is not placed in stable condition or it is placed an inclined
state. (The ground is not flat).
E1
E7-1
E7-2
E7-3
E7-4
E7-5
E2
Check if the water tap is
opened or not.
Check of the end of the drain hose is placed
too high, if it is immersed in and blocked
Alarm for abnormal
water filling.
Alarm for unfinished water
draining
Alarm for lid that is not closed
before wash and spin.
E3
Close the lid, press "Start" button.
E4
MAINTENANCE
Others
FXX
If the appliance does not start or it stops during the operation, initially try to find a solution
to the problem based on the table below. contact the service center.Otherwise,
Unbalanced wash load
during spinning
Evenly distribute the clothes in
the drum by hand.
Call for service if no solutions work
E7-1 E7-2 E7-3 E7-4 E7-5 appears after
pressing the power button, Please call
for service.
If E7-1 E7-2 E7-3 E7-4 E7-5 appears
during the operation , press the power
button to stop the machine.
Abnormal behavior
with dangerous fault.
(break wires, brake, sensors)
10
24
10
22
MAINTENANCE
Technical specifications
Standard Water Pressure
0.03MPa~0.8MPa
Net dimension
(W*D*Hmm)
Rated
Power
Net
Weight
Washing
Capacity
Power
Supply
Model
AW-T26D1400TM
13.0kg
220-240V~,
50Hz
43kg
599x640x1043
560W
Including drain hose
599x710x1043
(W*D*Hmm)
MAINTENANCE
10
24
10
23
Energy efficiency test program
It is identified as Malaysia Efficiency Program as followed:
Energy test program operation:
1. Press the“ON/OFF”switch.
2. Press the “ ” button, to select the” REGULAR” program. PROGRAM1
3. Press the “WATER LEVEL” button, to set the level 4.
4. Press the “START” button. Do not perform any operations not mentioned
in the above steps.
