This symbol both in the product and its user manual indicates that at the end
of devices electrical life, it should be recycled separately from your household
waste. There are adequate means to dispose of this material for proper
recycling. For more information, contact your local authorities.
1. Long press “ON/OFF” to turn on the speaker. A blue light above the port will
illuminate to indicate speaker is on.
2. Once on, speaker will enter wireless pairing mode (flashing color lights).
3. Search for “KM8426” on the wireless enabled device and connect to pair.
4. Use “ >” and “ < ” buttons for track selection and volume control.
5. Switch “ON/OFF” button to OFF to turn speaker off while not in use.
Specifications:
Pairing & Operation:
Removable Wireless Speaker
Instruc�on Manual
Included:
1 x Wireless Speaker
1 x Micro to USB-A Charging Cable
Charging:
Lithium Battery: 3.7V/500mAh
Charging Voltage: DC5V
Playback Time (at 50% vol): 3-4 hrs
Charging Time: 2-3 hrs
Operating Distance: Up to 10m / 33ft
Measurement: 44.8 x 72.6 mm
Quick Operation Guide:
Long Press: Volume Down
Short Press: Previous Track
Long Press: Volume Up
Short Press: Next Track
Long Press: Turn On/Off
Short Press: Pause/ Play Music
1. Using the provided charging cable, insert the Micro-USB plug into the charging
port and connect the USB-A plug into a certified 5V charging device.
Pairing Name: KM8426
Wireless: V5.1
Power: 4Ω / 3W, 50mm
SNR: ≥ 85db
Frequency: 20Hz - 20KHz
2. LED indicator light will be solid red while speaker is charging.
3. Red LED indicator light will shut off when charging is complete.
Please read all safety and operating instructions before use.
To reduce the risk of injury, close supervision is necessary when the product is used
near children.
Do not expose the product to rain or snow.
Use of a power supply or charger not recommended by or sold by the product
manufacturer may result in a risk of fire or injury to persons.
Do not use the product in excess of its output rating. Overloading outputs above
rating may result in a risk of fire or injury to persons.
Do not use the product if damaged or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
Do not disassemble the product. Take it to a qualified service person when service or
repair is required. Incorrect reassembly may result in a risk of fire on injury to persons.
Do not expose the product to fire or excessive temperatures. Exposure to fire or
temperature above 100°C may cause an explosion.
Have servicing performed by a qualified repair person using only indentical
replacement parts. This will ensure that the safety of the product is maintained.
Caution & Safety:
16 x 13 cm (Fold in half 8 x 13 cm)
Remove The Speaker
Before Washing
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure
condition without restriction.
