EN
Straightener
Instruction for Use
HS 80
2
ENGLISH
WARNING
• The device is only intended for domestic/private
use, not for commercial use.
• The appliance is not to be used by persons (inclu-
ding children) with reduced physical, sensory or
mental capabilities, or lack of experience and know
-
ledge, unless they have been given supervision or
instruction.
• Children must not play with the device.
• Cleaning and user maintenance must not be perfor
-
med by children unless supervised.
• If the supply cord is damaged, it must be replaced
by manufacturer, its service agent or similarly quali-
fied persons in order to avoid a hazard.
•
When using the device in the bathroom, unplug the
mains plug after use as water in the vicinity consti
-
tutes a danger, even when the device is switched o.
Read these instructions for use carefully. Observe the
warnings and safety notes. Keep these instructions for use
for future reference. Make the instructions for use
accessible to other users. If the device is passed on,
provide the instructions for use to the next user as well.
3
• As an additional safety measure, we recommend
the installation of a residual-current-operated pro
-
tective device (RCD) with a rated operational current
not exceeding 30 mA in the bathroom circuit. Your
local electrical specialist can provide you with the
relevant information.
• WARNING: Do not use this appliance near bathtubs,
showers, basins or other vessels containing water.
• Under no circumstances should you open or repair
the device yourself, as faultless functionality can no
longer be guaranteed thereafter. Failure to comply
will invalidate the warranty.
3
Contents
1. Included in delivery
Check that the exterior of the cardboard delivery packaging is intact and make sure
that all contents are present. Before use, ensure that there is no visible damage to
the device or accessories and that all packaging material has been removed. If you
have any doubts, do not use the device and contact your retailer or the specified
Customer Service address.
1 x Straightener
1 x Storage pouch
1 x This instruction manual
1. Included in delivery ......................... 3
2. Signs and symbols .......................... 4
3. Intended use ....................................5
4. Warnings and safety notes .............. 5
5. Device description ........................... 7
6. Initial use ......................................... 7
7. Usage .............................................. 8
8. Cleaning and maintenance ............10
9. Disposal ......................................... 10
10. Technical specifications .............. 11
11. Warranty / Service ....................... 11
4
4
2. Signs and symbols
The following symbols are used on the device, in these instructions for use, on the
packaging and on the type plate for the device:
Warning
Warning instruction indicating
a risk of injury or damage to
health
Manufacturer
Important
Safety note indicating possible
damage to the device/acces-
sory
Product information
Note on important information
WARNING
Do not use this appliance near
bathtubs, showers, basins or
other vessels
containing water.
Certification symbol for pro-
ducts that are exported to the
Russian Federation and mem-
bers of the CIS
Read the instructions
B
A
Marking to identify the packa-
ging material.
A = Material code, B = Material
number:
1-7 = Plastics, 20-22 = Paper
and cardboard
Disposal in accordance with
the Waste Electrical and Elec-
tronic Equipment EC Directive
– WEEE
CE labelling
This product satisfies the re-
quirements of the applicable
European and national direc-
tives.
Protection class II device
The device is double-protected
and thus corresponds to pro-
tection class 2
Separate the product and pa-
ckaging elements and dispose
of them in accordance with
local regulations.
Importer symbol
United Kingdom Conformity
Assessed Mark
Separate the packaging
elements and dispose of
them in accordance with local
regulations.
Serbian mark of conformity
5
3. Intended use
The straightener must be used only for individual, private straightening and shaping
of hair!
Warning
Use the unit only:
• For external use
•
For the purpose for which it was developed and in the manner specified in these
instructions for use.
Any improper use can be dangerous!
4. Warnings and safety notes
Danger
To avoid damage to health, we strongly advise against using the
device in the following situations:
• Never submerge the device in water or other liquids! Risk of electric shock!
• If the device should fall into water despite following all safety precautions,
immediately pull the mains plug from the socket. Do not reach into the water!
Risk of electric shock!
• Have the device checked by an authorised specialist workshop before using it
again. Danger to life due to electric shock!
• If the device has been dropped or suered any other damage, it must no longer
be used. Risk of electric shock and risk of injury!
• If there is visible damage to the device, mains cable/plug or accessories. If you
have any doubts, do not use the device and contact your retailer or the specified
Customer Services address. Risk of electric shock!
• Keep packaging material away from children – risk of suocation!
• Do not use extension cables in the bathroom to ensure the mains plug can be
accessed quickly in an emergency.
Warning
To avoid damage to health, please note the following:
• Ensure that no highly flammable liquids are located near the device. Risk of fire!
• Place the device on fireproof surfaces only. Risk of fire!
• The hair straightener must not be covered – risk of fire!
• Do not use the device on synthetic hair – risk of fire!
• Burn hazard. Keep appliance out of reach from young children, particularly during
use and cool down
6
• When the appliance is connected to the power supply, never leave it unattended
Notes
• Remove all packaging material before using the device.
• Only connect the device to a socket that has the voltage shown on the type plate.
• Only pull the mains cable from the socket by the mains plug.
• Do not use any additional parts that are not recommended by the manufacturer or
oered as accessories.
• Under no circumstances should you open or repair the device yourself, as fault
-
less functionality can no longer be guaranteed thereafter. Failure to comply will
invalidate the warranty.
• In the event of a fault or damage, have the device repaired by a certified specialist
workshop.
• Never leave the device unattended during use.
• Do not use the device outside.
• If you pass the device on to someone else, make sure to also pass on these
instructions for use.
7
5. Device description
2
1
3
4
5
6
7
8
9
11
10
2a
2b
2c
1 Titanium-coated hot plates 5 Button for decreasing the tempe-
rature (–)
2 MAGIC LED display 6 Button for increasing the tempe-
rature (+)
2a Temperature display 7 On/o switch
2b Ion display 8 Plate locking system
2c Protection function 9 360° swivel joint with anti-kink
protection
3 Button to set the ion intensity 10 Hanging eyelet
4 Button to switch on the protection
function
11 Mains cable
6. Initial use
Warning
• Position yourself on a dry, non-conductive surface.
Risk of electric shock!
• Ensure that your hands are dry.
Risk of electric shock!
• Your hair must be dry!
Risk of electric shock!
• The device can become very hot depending on the temperature setting and the
duration of use. When the device is hot, it must only be held using the handle –
risk of burns and fire!
• Do not touch the hot plates [1]. Risk of burns!
• Do not clamp objects between the hot plates [1].
• Switch the device o immediately if it is faulty or not working properly.
8
Important
• Untangle the mains cable [11] if it is twisted.
• Do not pull, twist or bend the mains cable [11] and do not pull or route it over/on
sharp, pointed objects or hot surfaces.
• Do not jam the mains cable [11] in drawers or doors, for example. The risk of
electric shock is increased if the mains cable is damaged or tangled.
7. Usage
Straightening/shaping hair
> Unlock the hair straightener by moving the lock button [8] to the open position.
> Press the on/o switch for two seconds [7].
- The unit is shipped with a default temperature setting for normal hair (100 °C).
- The heat-up phase is shown by the flashing °C symbol [2a].
- The selected temperature has been reached if the °C symbol is continuously
illuminated [2a].
- After about 30 seconds, the straightener is ready for use.
Adjusting the temperature
>
You can increase or decrease the temperature in 20 °C increments using the +/–
buttons [5, 6].
> The current temperature setting is shown on the LED temperature display [2]. The
temperature can be fixed by pressing the on/o switch [7] twice. The locked sym-
bol appears on the display. You can only switch o the hair straighteners if the
button lock is deactivated. To deactivate the button lock, press the on/o switch
[7] again twice. The locked symbol goes out.
> We recommend the following temperature settings:
> 100 °C to 140 °C:
- Fine, fragile, coloured or bleached hair
> 160 °C to 180 °C:
- Normal hair
> 200 °C to 220 °C:
- Strong and resistant hair
Select the ion intensity
> The intensity of the ions can be selected using the ion button [3]:
> Select the ion intensity:
0 No ions for particularly thin hair
1 Low level of ions for fine hair
2 High level of ions for relatively thick and frizzy hair
9
> Dry your hair completely before using the straightener.
> Your hair should be clean and free of styling products. Exceptions to this are
special products that aid straightening of the hair.
> Comb your hair with a wide-toothed comb to untangle it.
> Divide your hair into individual strands with a width of about 3 to 4 cm. Hold the
strands taut and place them between the heating plates [1] at the roots.
> Move the straightener slowly and smoothly from the roots to the ends. Do not
keep the straightener at any one place for longer than two seconds. This way you
will obtain the best results without overstraining or damaging your hair.
> You can shape the ends by twisting the straightener either outward or inward
before you pull it out over the ends.
Note
• The higher the selected temperature, the more quickly you get the desired result.
• If you work with the maximum temperature, do not work on the same strands
more than once.
Select function
The hair straightener has 2 functions:
Function Description
Protect
function
For gently straightening hair. The temperature is restricted to
approx. 160°C and kept constant; the ions are set at level 1 [4].
Memory
function
It is used for storing the preferred, individually selected tempe-
rature setting. The hair straightener automatically stores the last
temperature set.
Note
• Automatic shuto:
For your safety, the straightener shuts o automatically after 30 minutes.
After use
> Press the on/o switch. The straightener shuts o.
> Place the straightener on a non-combustible surface.
> Remove the plug from the socket after each use.
> Let the unit cool down.
> Do not wind the mains cable around the unit!
10
> Store the unit in a dry place that is out of reach of children.
> The unit can be hung on a hook by the hanging eyelet [10].
> The device can be stored and transported in the heat-resistant storage pouch.
8. Cleaning and maintenance
Cleaning
Warning
• Always pull the mains plug out of the socket before cleaning the device.
Risk of
electric shock!
• Ensure that no water gets inside the device.
Risk of electric shock!
• Do not clean the device with highly flammable liquids!
Risk of fire!
Note
• Your device is maintenance-free.
• Protect the device from dust, dirt and humidity.
• Do not clean the device in a dishwasher.
• Do not use any aggressive, caustic, abrasive or corrosive cleaning products or
hard brushes.
• The casing of the hair straightener and the hot plates may be cleaned with a soft
cloth dampened with warm water.
9. Disposal
In the interest of protecting the environment, the unit must not be thrown out with
the household waste at the end of its service life.
Dispose of the unit at a suitable local collection or recycling point.
Observe the local regulations for material disposal.
Please dispose of the device in accordance with EC Directive – WEEE
(Waste Electrical and Electronic Equipment).
If you have any queries, please contact the appropriate local authorities.
You can find out about collection points for your old units e.g. from the local
municipal government, the local waste disposal company or your dealer.
11
10. Technical specifications
Weight Approx. 390 g
Power supply 220-240 V~, 50-60 Hz
Power consumption 45 W
Temperature range 100-220 °C
Safety class II
Ambient conditions Only approved for indoor use
Allowable temperature range -10 to +40 °C
Subject to technical modifications.
11. Warranty / Service
Further information on the warranty and warranty conditions can be found in the
warranty leaflet supplied.
Subject to error and change
12
591.00_HS80_2024-06-25_04_IM1_BEU_EN
UK-Importer: Beurer UK Ltd.
Suite 16, Stonecross Place • Yew Tree Way • WA3 2SH Golborne
United Kingdom
Beurer GmbH • Söflinger Str. 218 • 89077 Ulm, Germany
www.beurer.com • beurer.healthguide.com
