Smartglasses
UsageGuidelines
Precautions
Do not charge in a humid or wet place
Do not use high-power chargers for charging; use a
standard 5V/1A charger and the charging cable that
comes with this product.
This product is prohibited from being soaked in water.
Please wipe it clean immediately after being exposed to
rain or water.
The material of this product is relatively soft, please
handle it with care and do not drop it.
This product has video and photo functions. Please
clean the camera lens and foreign matter on the surface
in time to avoid affecting the photo effect.
The lenses of this product (smart glasses) can be
replaced. You can go to a local optical shop to replace
the lenses according to your needs.
This product supports photo and video
recording functions. Please strictly comply
with local laws and regulations when using it
for covert photography, and use the product
responsibly. During photo and video recording,
the flash will illuminate. If any issues are
detected, please promptly address them.
Product Image
Connection Instructions
1. This smart glasses is a stand-alone product, and some
functions can only be used after connecting to a mobile
phone
2. HeyCyan " in the mobile app downloads and install it on
your phone.
3. You can scan the QR code to download, install and use it;
the QR code is as shown in the picture
Key Definition Description
Button 1:
1) In the power-off state, press and hold for 3 seconds to
start the machine.
2) In the power-on state, press and hold for 5 seconds to
turn it off.
3) When the machine is turned on, press and hold for 10
seconds to restore the factory settings (this operation
will clear all data on the device, so please use it
carefully).
4) In the power-on state, a short press can take pictures,
and the flash lights up; Photos are automatically stored
in the local memory of the product, and can be imported
into the mobile phone by connecting with the APP
(directly imported through WiFi).
5) When the phone is turned on, you can quickly press it
twice to record, the flash is always on, recording starts,
and short press it once to end recording. The recorded
video Will be automatically stored in the local memory of
the product, which can be connected to the APP and
imported into the mobile phone (directly through WiFi).
The default duration of recording is 3 minutes, which can
be set in the APP settings (15S,30S, 60S,3 minutes, 9
minutes, 12 minutes), 9 minutes and 12 minutes of video
recording have high power consumption, which will lead
to fever and will quickly return to normal after stopping
video recording.
6) In the power-on state, press and hold the key for 16
seconds, and the product will be forced to restart.
Button 2:
1) In the power-on state, press once to wake up the AI voice
assistant.
2) In the power-on state, press it twice quickly to turn on
quick map reading.
3) In the power-on state, press the key for a long time to
start recording, and press it for a short time during the
recording to end the recording (the default recording
time is 30min, optional 30min,60min,120min). The
recorded audio Will be automatically stored in the local
memory of the product, and can be connected to the APP
to import into the mobile phone (directly imported
through WiFi).
In case of an incoming call, in the Bluetooth connection
state, press the key 1 or 2 briefly to answer, and press it
once to hang up during the call.
In case of incoming call, in Bluetooth connection state,
press and hold the key 1 or 2 for 2 seconds to refuse to
answer the call.
Touch key 3:
1) In the case of music playing/talking, slide left and right to
increase or decrease the volume.
2) When the music is playing, double-click the slide bar to
pause the music; In the music pause state, double-click
the music playback with the slider.
3) When the music is playing, remove the glasses and
pause the music
4) Long press the slider while music is playing to wake up
the phone voice assistant
5) When playing music, swipe the slider three times to play
the next song
APP function usage
1. On the home page, click on the upper right corner (the
glasses icon on the right side of the Bluetooth name) to
set up my glasses (wearing detection, recording settings,
etc.)
2. On the home page, you can click on the glasses function
settings to learn, and there are explanation icons
3. In the album interface, you can set up the album;
pictures, videos, and recordings - import them on this
page
Kind tips
When the device is turned on, the indicator light flashes
blue, and after the APP is connected, the indicator light
goes out; when the device is turned off, the indicator
light flashes red and then turns off.
When taking photos and recording videos, the blue
indicator light is on and turns off after completion.
During data transmission, the blue indicator light is on
and turns off after completion.
During recording, the blue indicator light is on and turns
off after completion.
When the battery level is below 15%, the device stops
taking photos and recording videos.
Because it is a smart product, the software will be
updated regularly and the APP will prompt you;
If the battery level is below 15%, the upgrade cannot be
performed. You can resume using it after charging.
When the battery level is below 20%, the device will stop
data transmission and can be resumed after charging.
This product supports WiFi transmission, which requires
the mobile phone to be connected to the APP
The power consumption is high during recording and
data transmission. Long-term recording and data
transmission will cause heating. It will quickly return to
normal after stopping recording and data transmission.
After the Android phone is connected and paired with the
APP, go to --- "Phone Settings" --- "Bluetooth" --- find the
paired glasses ID (settings icon on the right ) and turn
on the "Turn on Bluetooth device volume
synchronization with phone" switch, and the volume can
be synchronized.
Unbind the product, and go to the phone settings ---
Bluetooth --- to ignore the need for synchronization, so
that other phones can connect to this device
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
