Push Pop Speaker
Instruction Manual
Instructions:
Be sure to fully charge the speaker before
using for the first time.
3.
The unit's full performance is achieved only
after 2 or 3 completed charge and discharge
cycles.
guarantee that interference will not occur in a
particular installation.If this equipment does
cause harmful interference to radio or television
SA250
Charging the Speaker:
4.
To reduce the risk of injury,close supervision is
reception,which can be determined by turning the
necessary when the product is used near children.
equipment off and on,the user is encouraged to
Connect the provided charging cable to a
power source and to the Type C port on
5.
Do not expose the device to moisture.
6.
Do not use the device in excess of its output
try to correct the interference by one or more of
the following measures:Reorient or relocate the
the speaker(3).
rating.Overload output above rating may result in
receiving antenna.Increase the separation
The LED indicator light will glow red when
charging and turn off when fully charged.
a risk of fire or injury.
7.
Do not use the device if damaged or modified
8.
Damaged or modified batteries may exhibit
between the equipment and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
unpredictable behavior resulting in fire,explosion
connected.
Bluetooth Setup:
or risk of injury.
Consult the dealer or an experienced radio/TV
Press and hold ON/OFF button,LED Indicator
9.
Do not disassemble the device.For repairs,seek
technician for help.
will then flash BLUE and RED
Turn on the Bluetooth function on the mobile
a qualified service professional.Incorrect
reassembly may result in a risk of fire or injury.
This device complies with part 15 of the FCC
rules.Operation is subject to the following two
device,Select "SA250" pairing name.
10.
Do not expose the device to fire or excessive
conditions (1) this device may not cause harmful
Functions:
1.
ON/OFF Button
2.
Type-C Port
3.
LED Indicator
Speaker will automatically pair if the mobile
device has been paired before.
Press and hold ON/OFF button to turn off
the device.
Incoming Calls:
If receiving a incoming call,audio will
automatically pause and will begin to play
again when call ends.
temperature.Exposure to fire to temperatures
above 104°F may cause explosion.
11.
Ensure that qualified service professionals
use only identical replacement parts to ensure
product safety.
FCC Statement:
Changes or modifications not expressly approved
by the party responsible for compliance could
interference and (2) this device must accept any
interference received,including interference that
may cause undersired operation.
The Bluetooth ® word mark and logos are
registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by NINGBO
GECEN PROMOTION & GIFT CO.LTD is under
Long press the ON/OFF button to reject the call.
void the user's authority to operate the equipment.
license.
What is included:
1x Speaker
1x USB to Type-c Charging Cable
1x Instruction Manual
Tech Specifications
Playing time up to 1.5 hr at max volume
Charging time:up to 2 hr
Paring Name"SA250"
SAFETY PRECAUTIONS:
WARNING-When using this product,basic
precautions should always be followed:
1.
Read all the instructions before use.
2.
Never store or use this product in
temperatures below 32°F(0°C) or above
115°F(45°C).
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.This equipment general
uses and can radiate radio frequency energy and
if not installed and used in accordance with the
instructions,may cause harmful interference to
raido communications.However,there is no
Other trademarks and trade names are those of
their respective owners.
FCC ID：2AJZYSA250
Bluetooth Listing Declaration ID:Q301856
FCC RF Exposure Warning Statement
：
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment can be used in portable exposure conditions
MADE IN CHINA
