Quick Start Guid
Attach Clip
Attach 2 clips to each wand
Mount Wand
Clip the wands to the support poles
at a height that targets the area you
want to treat
Face LEDs Inwar
Angle the wands so the LED lights
face toward you
Connect Y-Split Cabl
Find the Y-split cable and connect
the two long ends to each wand
Connect Controlle
Attach the short end of the Y-cable to
the cable connected to the controller
Secure Controller Butto
Use the clips to attach the controller
button to the side rail of the tent
within easy reach
Press once to start a 30-minute
session
Route Cable Through Ten
Remove the steam nozzle connector,
feed the controller cable through the
opening, then reattach the nozzle
Plug in Powe
Connect the adapter cable at the
back of the tent and plug it into a
power source. Connection must
remain outside the tent
Safet
Protective eyewear is available and
recommended. Do not expose power
connections to moisture.
